Home › Engine / Hybrid System › 2TR-FBE FUEL › GLOW PLUG CONTROLLER › from 2016.07
RM33J0E _51 Engine / Hybrid System _053775 2TR-FBE FUEL _0264913 GLOW PLUG CONTROLLER A

2TR-FBE FUEL  GLOW PLUG CONTROLLER  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


Hide 2.DISCONNECT CABLE FROM BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION


Hide 28551 3.REMOVE GLOW PLUG CONTROLLER

a.
A382791

Disconnect the 4 connectors from the glow plug controller.


b.

Remove the bolt and glow plug controller.


Hide 28559 4.REMOVE NO. 1 GLOW PLUG CONTROLLER BRACKET

a.
A382792

Remove the 2 screws and No. 1 glow plug controller bracket from the glow plug controller.