Home › Engine / Hybrid System › 2TR-FBE FUEL › GLOW PLUG CONTROLLER › from 2016.07
RM33J0E _51 Engine / Hybrid System _053775 2TR-FBE FUEL _0264913 GLOW PLUG CONTROLLER A

2TR-FBE FUEL  GLOW PLUG CONTROLLER  INSTALLATION  


PROCEDURE

Hide 28559 1.INSTALL NO. 1 GLOW PLUG CONTROLLER BRACKET

a.

Install the No. 1 glow plug controller bracket to the glow plug controller with the 2 screws.

Torque:
3.0 N*m (31 kgf*cm, 27 in.*lbf)


Hide 28551 2.INSTALL GLOW PLUG CONTROLLER

a.

Install the glow plug controller with the bolt.

Torque:
10.5 N*m (107 kgf*cm, 8 ft.*lbf)


b.

Connect the 4 connectors and attach the clamp.


Hide 3.CONNECT CABLE TO BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION