48811
1.INSTALL FRONT STABILIZER BAR
Install the front stabilizer bar to the vehicle body.
48815
2.INSTALL FRONT NO. 1 STABILIZER BAR BUSH
| *a | Bush Stopper |
| *b | Outer Side |
| *c | Front of the Vehicle |
Install the 2 front No. 1 stabilizer bar bushes.
Install each bush to the outer side of the bush stopper on the stabilizer bar.
Install each bush with the slit of the bush facing the front of the vehicle.
48824
3.INSTALL FRONT STABILIZER BRACKET
Install the 2 front stabilizer brackets with the 4 bolts.
Make sure the bracket's arrows face the front of the vehicle.
48810
4.INSTALL FRONT STABILIZER LINK ASSEMBLY LH
Install the front stabilizer link assembly LH with the 2 nuts.
If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud in place.
48820B
5.INSTALL FRONT STABILIZER LINK ASSEMBLY RH
Use the same procedure described for the LH side.
51405D
6.INSTALL ENGINE UNDER BRACE SUB-ASSEMBLY
Install the 2 engine under brace sub-assemblies with the 10 bolts.
51442
7.INSTALL NO. 2 ENGINE UNDER COVER
51410
8.INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY
9.INSTALL FRONT WHEEL
10.INSPECT AND ADJUST FRONT WHEEL ALIGNMENT
11.PERFORM INITIALIZATION (w/ Automatic Headlight Beam Level Control System)
12.INSPECT AUTOMATIC LIGHT CONTROL SYSTEM (w/ Automatic Headlight Beam Level Control System)
13.INSPECT HEADLIGHT AIMING (w/ Automatic Headlight Beam Level Control System)