Home › Drivetrain › AXLE AND DIFFERENTIAL › REAR AXLE HUB BOLT › 2015.08–2016.01
RM3270E _52 Drivetrain _041686 AXLE AND DIFFERENTIAL _0195331 REAR AXLE HUB BOLT A

AXLE AND DIFFERENTIAL  REAR AXLE HUB BOLT  REPLACEMENT  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.REMOVE REAR WHEEL

Hide 42312E 3.REMOVE REAR AXLE HUB BOLT

a.
C335748C01
2.385,0.833 2.385,0.667 2.385,0.667 2.635,0.667 false 1.656,1.396 1.01,1.708 1.01,1.708 1.646,1.063 true 2.698,0.583 3.156,0.781 0.458,0.198 10 false SST 2.958,1.552 3.417,1.75 0.458,0.198 10 false *a 1.208,1.833 1.667,2.031 0.458,0.198 10 false *b 0.833,1.635 1.292,1.833 0.458,0.198 10 false *c
*a Turn
*b Hold
*c Nut


Temporarily install 2 nuts to the 2 rear axle hub bolts as shown in the illustration.


b.

Using SST and a brass bar or equivalent to hold the rear axle shaft, remove the rear axle hub bolt.

SST
09650-17011  


Hide 42312E 4.INSTALL REAR AXLE HUB BOLT

a.
C335749C01
2.167,0.25 2.5,0.25 2.5,0.25 2.75,0.333 true 2.885,0.833 2.885,1.333 2.885,1.333 3.052,1.333 true 1.146,1.042 0.458,1.708 0.458,1.708 1.146,1.375 true 2.198,1.313 2.51,1.51 0.313,0.198 10 false *a 0.729,1.865 1.042,2.063 0.313,0.198 10 false *b 1.979,0.167 2.292,0.365 0.313,0.198 10 false *c 3.115,1.26 3.427,1.458 0.313,0.198 10 false *d 0.271,1.635 0.583,1.833 0.313,0.198 10 false *d
*a Turn
*b Hold
*c Plate Washer
*d Nut


Install a plate washer and nut to a new rear axle hub bolt as shown in the illustration.


b.

Using a brass bar or equivalent to hold the rear axle shaft, install the rear axle hub bolt by tightening the nut.


c.

Remove the 2 nuts from the 2 rear axle hub bolts.