Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER › 2015.08–2016.01
RM3270E _59 Vehicle Exterior _041722 EXTERIOR PANELS / TRIM _0203207 REAR BUMPER A

EXTERIOR PANELS / TRIM  REAR BUMPER  REASSEMBLY  


PROCEDURE

Hide 52462 1.INSTALL REAR BUMPER PAD

HINT:
·

When installing the rear bumper pad, heat the rear bumper cover using a heat light.

·

Use the same procedure to install the rear bumper pad on the other side.



Standard:
Item Temperature
Rear Bumper Cover 20 to 30°C (68 to 86°F)


CAUTION:
E306500C23
2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b
*a Heated Part
*b Heat Light


·

Do not touch the heat light and heated parts.

·

Touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.



a.

When using a new rear bumper cover:

i.

Clean the surface of a new rear bumper cover.


ii.

Using a heat light, heat the rear bumper cover surface.



b.

When reusing the rear bumper cover:

i.

Using a heat light, heat the rear bumper cover surface.


ii.

Remove the double-sided tape from the rear bumper cover.


iii.

Wipe off any tape adhesive residue with cleaner.



c.
B408358C01
1.969,1.031 2.313,1.031 true 2.333,0.948 2.646,1.146 0.313,0.198 10 true *a
*a Mark-off Line


Install a new rear bumper pad.

i.

Remove the peeling paper from the face of a new rear bumper pad.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



ii.

Align the rear bumper pad with the mark-off line of the rear bumper cover and install it as shown in the illustration.

HINT:

Press the rear bumper pad firmly to install it.




Hide 52707A 2.INSTALL REAR BUMPER SIDE MOULDING SUB-ASSEMBLY LH

a.
B408356

Install the rear bumper side moulding sub-assembly LH with the 4 clips.


Hide 52706A 3.INSTALL REAR BUMPER SIDE MOULDING SUB-ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 52169C 4.INSTALL LOWER REAR BUMPER COVER

a.

Install the lower rear bumper cover with the 12 clips.

B408354


Hide 82183 5.INSTALL NO. 3 LUGGAGE ROOM WIRE (w/ TOYOTA Parking Assist-sensor System)

a.

Attach the clamp to install the No. 3 luggage room wire.

B430037


Hide 89341A 6.INSTALL NO. 1 ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)

Hide 81490E 7.INSTALL REFLEX REFLECTOR ASSEMBLY LH

a.

Attach the guide to install the reflex reflector assembly LH.


b.

Install the bolt.


Hide 81480D 8.INSTALL REFLEX REFLECTOR ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.