Home › Vehicle Exterior › DOOR / HATCH › REAR DOOR OPENING TRIM WEATHERSTRIP
RM3270E _59 Vehicle Exterior _041717 DOOR / HATCH _0205104 REAR DOOR OPENING TRIM WEATHERSTRIP A

DOOR / HATCH  REAR DOOR OPENING TRIM WEATHERSTRIP  REASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the RH side.



PROCEDURE

Hide 62331C 1.INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH

a.
B409013C01
1.135,0.688 1.135,0.479 1.135,0.479 1.24,0.479 true 1.917,3.865 2.104,3.448 2.104,3.448 2.333,3.448 false 1.208,0.396 1.448,0.594 0.24,0.198 10 true *b 2.375,3.365 2.615,3.563 0.24,0.198 10 true *a
*a Paint Mark
*b Mark Position


Align the paint mark on the rear door opening trim weatherstrip RH with the mark position on the vehicle and install the rear door opening trim weatherstrip RH.

NOTICE:
·

Always align the paint mark when installing the part. If the paint mark position is out of place, water leaks may occur.

·

After the installation, check that the corners are properly installed.



HINT:

To easily install the weatherstrip, first install the area with the paint mark as shown in the illustration. Then install the part toward the corners and push any excess length into the corners.



Hide 67917C 2.INSTALL REAR DOOR SCUFF PLATE RH