Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
84280D
1.INSTALL POWER BACK DOOR SENSOR ASSEMBLY LH
Attach the clip to install the power back door sensor assembly LH.
Install the 4 screws.
Connect the connector.
67750
2.INSTALL BACK DOOR TRIM BOARD ASSEMBLY
74811D
3.INSTALL DOOR PULL HANDLE
67938A
4.INSTALL BACK DOOR SIDE GARNISH LH
67937B
5.INSTALL BACK DOOR SIDE GARNISH RH
67939B
6.INSTALL CENTER BACK DOOR GARNISH