Home › Engine / Hybrid System › CRUISE CONTROL › CRUISE CONTROL MAIN SWITCH › 2015.08–2016.01
RM3270E _51 Engine / Hybrid System _041679 CRUISE CONTROL _0205136 CRUISE CONTROL MAIN SWITCH A

CRUISE CONTROL  CRUISE CONTROL MAIN SWITCH  INSTALLATION  


PROCEDURE

Hide 84633 1.INSTALL CRUISE CONTROL SWITCH WIRE

a.

Connect the connector and install the cruise control switch wire to the cruise control main switch.


Hide 84632 2.INSTALL CRUISE CONTROL MAIN SWITCH

a.
A346024C02
0.313,1.083 0.417,1.083 0.417,1.083 0.677,0.833 true 0.729,0.563 0.958,0.146 0.958,0.146 1.052,0.146 true 1.135,0.063 1.333,0.24 0.198,0.177 10 true *1 0.115,0.99 0.302,1.167 0.188,0.177 10 true *a 1.906,1.875 2.063,2.073 0.156,0.198 10 true 1 1.969,0.521 2.125,0.698 0.156,0.177 10 true 2
*1 Cruise Control Switch Wire
*a Rib


Pass the cruise control switch wire under the rib as shown in the illustration, and temporarily install the cruise control main switch with the 2 screws.


b.

Tighten the 2 screws in the order as shown in the illustration to install the cruise control main switch.

Torque:
2.4 N*m (24 kgf*cm, 21 in.*lbf)


c.

Connect the connector.


Hide 45130 3.INSTALL HORN BUTTON ASSEMBLY

Hide 4.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION