Home › Vehicle Interior › SEAT BELT › REAR NO. 1 SEAT INNER BELT ASSEMBLY(for 60/40 Split Seat Type 60 Side)
RM3270E _58 Vehicle Interior _041712 SEAT BELT _0206031 REAR NO. 1 SEAT INNER BELT ASSEMBLY(for 60/40 Split Seat Type 60 Side) A

SEAT BELT  REAR NO. 1 SEAT INNER BELT ASSEMBLY(for 60/40 Split Seat Type 60 Side)  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
·
B394717

Wear protective gloves. Sharp areas on the parts may injure your hands.

·

There is risk of injury.

·

Replace any other damaged parts as necessary.



PROCEDURE

Hide 72526E 3.REMOVE RECLINING ADJUSTER RELEASE HANDLE LH

Hide 72616A 4.REMOVE REAR SEATBACK LOCK STRIKER COVER LH

Hide 72618 5.REMOVE REAR SEATBACK LOCK STRIKER PROTECTOR

Hide 72616A 6.REMOVE REAR SEATBACK LOCK STRIKER COVER LH

Hide 72618 7.REMOVE REAR SEATBACK LOCK STRIKER PROTECTOR

Hide 72201B 13.REMOVE SEAT TRACK HANDLE SUB-ASSEMBLY LH

Hide 72190 14.REMOVE REAR SEAT INNER TRACK ASSEMBLY LH

Hide 72170 15.REMOVE REAR SEAT OUTER TRACK ASSEMBLY LH

Hide 73340C 16.REMOVE REAR CENTER SEAT LAP TYPE BELT ASSEMBLY LH

a.
B403755

While sliding the part in the direction indicated by the arrow shown in the illustration, detach the J hook.


b.
B403758

Pull out the No. 1 fold seat stopper band assembly from the rear end of the seat cushion cover with pad.


c.

Pull out the fasteners as shown in the illustration.

B403756C02
0,0 0,0 false
V113147

Remove in this Direction - -



d.
B403757C01
0,0 0,0 false
V113147

Remove in this Direction


Open the fasteners as shown in the illustration.


e.
B421274C01
0,0 0,0 false
V113147

Remove in this Direction


While opening the No. 1 seat cushion cover sub-assembly LH, pull out the rear No. 1 seat lock cable assembly and rear center seat lap type belt assembly LH from the slit as shown in the illustration.


f.

Disconnect the connector.

B427426C01
0,0 0,0 false
V100135

Connector
V100136

A
V100137

Bolt - -



g.

Detach the clamp.


h.

Remove the bolt.


i.
B409120C01
0,0 0,0 false
V113147

Remove in this Direction


Remove the rear center seat lap type belt assembly LH from the hole of the rear seat cushion cover with pad LH as shown in the illustration.


Hide 73330C 17.REMOVE REAR CENTER SEAT LAP TYPE BELT ASSEMBLY RH

a.

Detach the clamp.

B427427


b.
B409118C01
1.583,1.104 0.74,0.635 true 0.51,0.521 0.823,0.677 0.313,0.156 10 true *a
*a Band
V113147

Remove in this Direction


Disconnect the rear center seat lap type belt assembly RH from the band as shown in the illustration.


c.
B409115C01
0,0 0,0 false
V113147

Remove in this Direction


Remove the bolt and the rear center seat lap type belt assembly RH from the hole of the rear seat cushion cover with pad LH as shown in the illustration.