Home › Vehicle Interior › SEAT BELT › REAR NO. 1 SEAT OUTER BELT ASSEMBLY
RM3270E _58 Vehicle Interior _041712 SEAT BELT _0206033 REAR NO. 1 SEAT OUTER BELT ASSEMBLY A

SEAT BELT  REAR NO. 1 SEAT OUTER BELT ASSEMBLY  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the RH side.

·

A bolt without a torque specification is shown in the standard bolt chart.

Click hereGeneral>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS



PROCEDURE

Hide 73360C 1.INSTALL REAR NO. 1 SEAT OUTER BELT ASSEMBLY RH

a.
B409129C01
1.948,0.396 2.24,0.583 0.292,0.188 10 true *a 2.229,1.813 2.479,2.021 0.25,0.208 10 true *b 2.302,0.396 2.615,0.594 0.313,0.198 10 true 1 2.531,1.823 2.844,2.021 0.313,0.198 10 true 2
*a Bolt A
*b Bolt B


Attach the 2 guides and temporarily install the retractor of the rear No. 1 seat outer belt assembly RH with the 2 bolts.


b.

Tighten the 2 bolts in the order shown in the illustration.

Torque:
Bolt A : 12.5 N*m (127 kgf*cm, 9 ft.*lbf)
Bolt B : 42 N*m (428 kgf*cm, 31 ft.*lbf)


c.
B409128

Connect the rear No. 1 seat outer belt assembly RH with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


Hide 73178B 2.INSTALL SEAT BELT ANCHOR COVER CAP

Hide 62511 3.INSTALL QUARTER INSIDE TRIM BOARD RH

Hide 73560 4.INSTALL REAR NO. 2 SEAT OUTER BELT ASSEMBLY RH (for Floor Anchor)

a.
B409134

Connect the floor anchor of the rear No. 2 seat outer belt assembly RH with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


Hide 73360C 5.INSTALL REAR NO. 1 SEAT OUTER BELT ASSEMBLY RH (for Floor Anchor)

a.
B409127

Connect the floor anchor of the rear No. 1 seat outer belt assembly RH with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


Hide 73233B 6.INSTALL REAR NO. 2 SEAT OUTER LAP BELT ANCHOR COVER

Hide 73233A 7.INSTALL REAR NO. 1 SEAT OUTER LAP BELT ANCHOR COVER

Hide 67935 8.INSTALL BACK DOOR SCUFF PLATE

Hide 67917C 9.INSTALL REAR DOOR SCUFF PLATE RH