Home › Vehicle Exterior › WIPER / WASHER › WASHER NOZZLE(for Rear Side)
RM3270E _59 Vehicle Exterior _041719 WIPER / WASHER _0213521 WASHER NOZZLE(for Rear Side) N

WIPER / WASHER  WASHER NOZZLE(for Rear Side)  ADJUSTMENT  


PROCEDURE

Hide 85345R 1.ADJUST REAR WASHER NOZZLE

a.
E292057

Using a thin-bladed screwdriver, adjust the nozzle jet of the rear washer nozzle so that the contact area is within the standard.

Click hereVehicle Exterior>WIPER / WASHER>WASHER NOZZLE(for Rear Side)>ON-VEHICLE INSPECTION

NOTICE:

Do not use a safety pin or other pointed tools. Doing so may damage the inside of the rear washer nozzle sub-assembly.


HINT:

Use a thin-bladed screwdriver with a tip approximately 1 mm (0.0394 in.) thick.