Home › Vehicle Exterior › WIPER / WASHER › WASHER NOZZLE(for Rear Side)
RM3270E _59 Vehicle Exterior _041719 WIPER / WASHER _0213521 WASHER NOZZLE(for Rear Side) G

WIPER / WASHER  WASHER NOZZLE(for Rear Side)  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 85345R 1.INSPECT REAR WASHER NOZZLE

a.

With the ignition switch turned to ON, check that the center stream of washer fluid sprays on the back door glass within the hatched area shown in the illustration.

OK:

Washer fluid hits the back door glass in the area shown in the illustration.


If the result is not as specified, adjust the rear washer nozzle sub-assembly.

B407688C01
2.75,1.229 2.906,1.427 0.156,0.198 10 true A 3.458,1.781 3.615,1.979 0.156,0.198 10 true B
V100155

Standard Clearance - -


Standard:
Area Specified Condition Area Specified Condition
A 78.9 mm (3.1063 in.) B 126.5 mm (4.9803 in.)


NOTICE:

If the result is not as specified, adjust the rear washer nozzle.

Click hereVehicle Exterior>WIPER / WASHER>WASHER NOZZLE(for Rear Side)>ADJUSTMENT