86101J
1.INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY
82171
2.INSTALL NO. 1 ROOF WIRE
Fix the No. 1 roof wire in place with tape as shown in the illustration.
Align the tape with the markings when attaching it.
| *a | Marking |
|
Tape |
w/ Vanity Light:
Turn the visor connectors approximately 90° clockwise to install them to the roof headlining assembly.
81340
3.INSTALL VANITY LIGHT ASSEMBLY (w/ Vanity Light)
Use the same procedure for both vanity light assemblies.
| *1 | Bulb Holder |
| *a | Claw A |
| *b | Claw B |
Attach claw A of the vanity light assembly to temporarily install the vanity light assembly to the roof headlining assembly.
Attach claw B of the bulb holder to install the vanity light assembly.
63610C
4.INSTALL NO. 1 AIR OUTLET REGISTER ASSEMBLY
Use the same procedure for all No. 1 air outlet register assemblies.
Attach the claw to install the No. 1 air outlet register assembly.
87201F
5.INSTALL NO. 3 AIR DUCT SUB-ASSEMBLY
Install the No. 3 air duct sub-assembly with adhesive or double-sided tape.
87201B
6.INSTALL NO. 2 AIR DUCT SUB-ASSEMBLY
Install the No. 2 air duct sub-assembly with adhesive or double-sided tape.
Attach the clamp.
87201
7.INSTALL NO. 1 AIR DUCT SUB-ASSEMBLY
Install the No. 1 air duct sub-assembly with adhesive or double-sided tape.
62653F
8.INSTALL ROOF HEADLINING PACKING
Install a new roof headlining packing with double-sided tape.
63381
9.INSTALL FRONT HEADLINING RETAINER
Install a new front headlining retainer with adhesive or double-sided tape.
63346
10.INSTALL NO. 6 ROOF SILENCER PAD
| *a | Silencer Marking |
Align the No. 6 roof silencer pad with the silencer markings on the roof headlining and install the No. 6 roof silencer pad using double-sided tape or adhesive as shown in the illustration.
63345
11.INSTALL NO. 5 ROOF SILENCER PAD
| *a | Silencer Marking |
Align the No. 5 roof silencer pad with the silencer markings on the roof headlining and install the No. 5 roof silencer pad using double-sided tape or adhesive as shown in the illustration.
63344
12.INSTALL NO. 4 ROOF SILENCER PAD
| *a | Silencer Marking |
Align the No. 4 roof silencer pad with the silencer markings on the roof headlining and install the No. 4 roof silencer pad using double-sided tape or adhesive as shown in the illustration.
63343
13.INSTALL NO. 3 ROOF SILENCER PAD
| *a | Silencer Marking |
Align the 2 No. 3 roof silencer pads with the silencer markings on the roof headlining and install the 2 No. 3 roof silencer pads using double-sided tape or adhesive as shown in the illustration.
63342
14.INSTALL NO. 2 ROOF SILENCER PAD
| *a | Silencer Marking |
Align the No. 2 roof silencer pad with the silencer markings on the roof headlining and install the No. 2 roof silencer pad using double-sided tape or adhesive as shown in the illustration.
63341
15.INSTALL NO. 1 ROOF SILENCER PAD
| *a | Silencer Marking |
Align the 2 No. 1 roof silencer pads with the silencer markings on the roof headlining and install the 2 No. 1 roof silencer pads using double-sided tape or adhesive as shown in the illustration.