1.REMOVE MANUAL TRANSMISSION ASSEMBLY
31210
2.REMOVE CLUTCH COVER ASSEMBLY
31250
3.REMOVE CLUTCH DISC ASSEMBLY
13405
4.REMOVE FLYWHEEL SUB-ASSEMBLY
11355
5.REMOVE REAR END PLATE
11354
6.REMOVE FLYWHEEL HOUSING DUST SEAL
11381A
7.REMOVE REAR CRANKSHAFT OIL SEAL
| *a | Cut Position |
Using a knife, cut off the lip of the rear engine oil seal.
Using a screwdriver, pry out the rear engine oil seal from the rear engine oil seal retainer.
Be careful not to damage the crankshaft and rear engine oil seal retainer.
After removal, check the crankshaft for damage. If damaged, smooth the surface with #400 sandpaper.
Tape the screwdriver tip before use.