Home › Engine / Hybrid System › 5L-E ENGINE MECHANICAL › REAR CRANKSHAFT OIL SEAL › from 2016.01
RM3270E _51 Engine / Hybrid System _048650 5L-E ENGINE MECHANICAL _0231149 REAR CRANKSHAFT OIL SEAL A

5L-E ENGINE MECHANICAL  REAR CRANKSHAFT OIL SEAL  INSTALLATION  


PROCEDURE

Hide 11381A 1.INSTALL REAR CRANKSHAFT OIL SEAL

a.
A057268E03
2.042,1.042 2.531,1.167 2.531,1.167 2.229,1.427 false 2.552,1.052 2.875,1.229 0.323,0.177 10 false SST

Apply MP grease to the lip of a new rear engine oil seal.

NOTICE:
·

Keep the lip free of foreign matter.

·

Do not allow MP grease to contact the dust seal.




b.

Using SST and a hammer, tap in the rear engine oil seal until its surface is flush with the rear engine oil seal retainer edge.

SST
09223-15030  
09950-70010  (09951-07100)

NOTICE:
·

Keep the lip free from foreign matter.

·

Do not tap the rear engine oil seal at an angle.

·

Make sure that the rear engine oil seal is properly installed.




Hide 11354 2.INSTALL FLYWHEEL HOUSING DUST SEAL

Hide 13405 4.INSTALL FLYWHEEL SUB-ASSEMBLY

Hide 31250 5.INSTALL CLUTCH DISC ASSEMBLY

Hide 31210 6.INSTALL CLUTCH COVER ASSEMBLY