88515
1.INSTALL COOLER EXPANSION VALVE
Apply sufficient compressor oil to 2 new O-rings and the fitting surfaces of the cooler expansion valve.
ND-OIL 8 or equivalent
Install the 2 O-rings.
Keep the O-rings and O-ring fitting surfaces free of foreign matter.
Temporarily install the cooler expansion valve.
Using a 4 mm hexagon wrench, install the cooler expansion valve with the 2 hexagon bolts.
88710E
2.CONNECT AIR CONDITIONER TUBE AND ACCESSORY ASSEMBLY (for 1GD-FTV, 2GD-FTV)
Remove the vinyl tape from the air conditioner tube and accessory assembly.
Apply sufficient compressor oil to 2 new O-rings and the fitting surfaces of the cooler expansion valve.
ND-OIL 8 or equivalent
Install the 2 O-rings.
Keep the O-rings and O-ring fitting surfaces free of foreign matter.
Connect the air conditioner tube and accessory assembly.
Tighten the bolt.
88710E
3.CONNECT AIR CONDITIONER TUBE AND ACCESSORY ASSEMBLY (except 1GD-FTV, 2GD-FTV)
88707
4.CONNECT SUCTION PIPE SUB-ASSEMBLY (except 1GD-FTV, 2GD-FTV)
|
Install in this Direction |
Remove the vinyl tape from the suction pipe sub-assembly.
Sufficiently apply compressor oil to new O-ring and fitting surface of the suction pipe sub-assembly.
ND-OIL 8 or equivalent
Install the O-ring to the suction pipe sub-assembly.
Keep the O-ring and O-ring fitting surfaces free of foreign matter.
Connect the suction pipe sub-assembly.
Rotate the hook connector in the direction indicated by the arrow in the illustration and install the bolt.
88710E
5.CONNECT AIR CONDITIONER TUBE AND ACCESSORY ASSEMBLY (except 1GD-FTV, 2GD-FTV, w/ Sub-cool Accelerator)
6. CHARGE AIR CONDITIONING SYSTEM WITH REFRIGERANT
7. WARM UP ENGINE
8.INSPECT FOR REFRIGERANT LEAK