88460
1.INSTALL COOLER CONDENSER ASSEMBLY
|
Install in this Direction |
Install the cooler condenser assembly.
Do not damage the cooler condenser assembly or radiator assembly when installing the cooler condenser assembly.
88716A
2.CONNECT COOLER REFRIGERANT LIQUID PIPE A
Remove the vinyl tape from the cooler refrigerant liquid pipe A and the connecting part of the cooler condenser assembly.
Sufficiently apply compressor oil to a new O-ring and the fitting surface of the cooler refrigerant liquid pipe A.
ND-OIL 8 or equivalent
Install the O-ring to the cooler refrigerant liquid pipe A.
Keep the O-ring and O-ring fitting surfaces free of foreign matter.
Connect the cooler refrigerant liquid pipe A to the cooler condenser assembly with the bolt.
88711
3.CONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE
Remove the vinyl tape from the No. 1 cooler refrigerant discharge hose and the connecting part of the cooler condenser assembly.
Sufficiently apply compressor oil to a new O-ring and the fitting surface of the No. 1 cooler refrigerant discharge hose.
ND-OIL 8 or equivalent
Install the O-ring to the No. 1 cooler refrigerant discharge hose.
Keep the O-ring and O-ring fitting surfaces free of foreign matter.
Connect the No. 1 cooler refrigerant discharge hose to the condenser assembly with the bolt.
16400
4.INSTALL RADIATOR ASSEMBLY
53294C
5.INSTALL RADIATOR SIDE DEFLECTOR LH
Attach the claw to install the radiator side deflector LH.
53293C
6.INSTALL RADIATOR SIDE DEFLECTOR RH
Attach the claw to install the radiator side deflector RH.
53205
7.INSTALL RADIATOR UPPER SUPPORT SUB-ASSEMBLY
Connect each clamp to install the radiator upper support sub-assembly.
Install the radiator upper support sub-assembly with the 4 bolts.
Install the No. 1 radiator air guide with 4 new clips.
53208A
8.INSTALL HOOD LOCK SUPPORT SUB-ASSEMBLY
Install the hood lock support sub-assembly with the 3 bolts.
Attach each clamp.
for Automatic Air Conditioning System:
Attach the clamp to install the thermistor assembly (ambient temperature sensor).
88590
9.INSTALL SHROUD BLOWER ASSEMBLY (w/ Condenser Fan)
53510
10.CONNECT HOOD LOCK ASSEMBLY
86510
11.INSTALL HIGH PITCHED HORN ASSEMBLY
Click hereVehicle Exterior>HORN>HORN>INSTALLATION
86520
12.INSTALL LOW PITCHED HORN ASSEMBLY
Click hereVehicle Exterior>HORN>HORN>INSTALLATION
52119A
13.INSTALL FRONT BUMPER COVER
14. CHARGE AIR CONDITIONING SYSTEM WITH REFRIGERANT
15. WARM UP ENGINE
16.INSPECT FOR REFRIGERANT LEAK