Home › Engine / Hybrid System › 1GD-FTV ENGINE CONTROL › ECD SYSTEM › from 2016.01
RM3270E _51 Engine / Hybrid System _041671 1GD-FTV ENGINE CONTROL _0236339 ECD SYSTEM J

1GD-FTV ENGINE CONTROL  ECD SYSTEM  VC Output Circuit  


DESCRIPTION

The ECM constantly generates a 5 V power source voltage from the battery voltage supplied to the +B (BATT) terminal to operate the microprocessor. The ECM also provides this power source voltage to the sensors through the VC output circuit.

A206916E63
4.375,1.25 6.219,1.594 1.844,0.344 10 false 5 V Constant Voltage Circuit 5.354,2.094 6.365,2.438 1.01,0.344 10 false Microprocessor 1.615,1.135 2.792,1.396 1.177,0.26 10 false from EFI-B Fuse 0.906,1.479 2.854,1.76 1.948,0.281 10 false from EFI-MAIN NO. 1 Relay 2.906,1.031 3.302,1.219 0.396,0.188 10 false BATT 0.354,2.229 2.615,2.802 2.26,0.573 10 false Throttle Position Sensor, Accelerator Pedal Position Sensor, etc. (sensors which have ICs) 0.365,2.969 2.625,3.438 2.26,0.469 10 false Engine Coolant Temperature Sensor, Intake Air Temperature Sensor, etc. 4.063,3.125 4.323,3.333 0.26,0.208 10 false R 3,1.375 3.281,1.573 0.281,0.198 10 false +B 3.177,2.25 3.542,2.479 0.365,0.229 10 false VC 4.885,3.375 5.333,3.604 0.448,0.229 10 false ECM

When the VC circuit has a short circuit, the CPU in the ECM and sensors that are supplied power through the VC circuit are deactivated because power is not supplied from the VC circuit. When the system is in this condition, it will not start.

WIRING DIAGRAM

·

For the circuit diagram of the ECM power source circuit.

Click hereEngine / Hybrid System>1GD-FTV ENGINE CONTROL>ECD SYSTEM>ECM Power Source Circuit

·

VC Power Source Circuit


A348659E07
5.875,8.427 6.26,8.604 0.385,0.177 10 false ECM 5.156,0.5 5.469,0.656 0.313,0.156 10 false G50 5.156,0.875 5.469,1.031 0.313,0.156 10 false G50 5.167,1.24 5.479,1.396 0.313,0.156 10 false G50 5.156,1.615 5.469,1.771 0.313,0.156 10 false G50 5.156,1.99 5.469,2.146 0.313,0.156 10 false G50 5.156,2.365 5.469,2.521 0.313,0.156 10 false G50 5.167,3.604 5.458,3.781 0.292,0.177 10 false C41 5.167,4 5.458,4.177 0.292,0.177 10 false C41 5.167,4.396 5.458,4.573 0.292,0.177 10 false C41 5.167,5.177 5.458,5.354 0.292,0.177 10 false C40 5.167,5.563 5.458,5.74 0.292,0.177 10 false C40 5.156,6.865 5.448,7.042 0.292,0.177 10 false C40 5.167,7.26 5.458,7.438 0.292,0.177 10 false C40 5.156,7.656 5.552,7.865 0.396,0.208 10 false C40 0.438,2.708 0.75,2.865 0.313,0.156 10 false A30 0.438,2.854 3.24,3.281 2.802,0.427 10 false Accelerator Pedal Position Sensor (Accelerator Pedal Sensor Assembly) 0.427,5.938 0.646,6.094 0.219,0.156 10 false Z2 0.427,6.083 1.813,6.271 1.385,0.188 10 false Fuel Pressure Sensor 0.417,8.135 0.635,8.292 0.219,0.156 10 false Y1 0.417,8.302 2.344,8.49 1.927,0.188 10 false Diesel Throttle Body Assembly 2.104,0.375 2.26,0.531 0.156,0.156 10 false 1 2.104,0.75 2.26,0.906 0.156,0.156 10 false 2 2.104,1.115 2.26,1.271 0.156,0.156 10 false 3 2.104,1.49 2.26,1.646 0.156,0.156 10 false 4 2.104,1.865 2.26,2.021 0.156,0.156 10 false 5 2.104,2.24 2.26,2.396 0.156,0.156 10 false 6 2.115,3.479 2.271,3.635 0.156,0.156 10 false 1 2.115,3.875 2.271,4.031 0.156,0.156 10 false 2 2.115,4.26 2.271,4.417 0.156,0.156 10 false 3 2.115,4.656 2.271,4.813 0.156,0.156 10 false 4 2.115,5.052 2.271,5.208 0.156,0.156 10 false 5 2.115,7.135 2.271,7.292 0.156,0.156 10 false 5 2.115,6.74 2.271,6.896 0.156,0.156 10 false 3 2.115,7.531 2.271,7.688 0.156,0.156 10 false 6 5.208,0.323 5.427,0.479 0.219,0.156 10 false 30 5.219,0.698 5.438,0.854 0.219,0.156 10 false 25 2.115,5.438 2.271,5.594 0.156,0.156 10 false 6 5.219,1.073 5.438,1.229 0.219,0.156 10 false 31 5.219,1.438 5.438,1.594 0.219,0.156 10 false 29 5.219,1.813 5.438,1.969 0.219,0.156 10 false 22 5.208,3.427 5.427,3.583 0.219,0.156 10 false 33 5.219,3.823 5.438,3.979 0.219,0.156 10 false 26 5.219,4.219 5.438,4.375 0.219,0.156 10 false 25 5.208,4.604 5.427,4.76 0.219,0.156 10 false 19 5.219,5 5.438,5.156 0.219,0.156 10 false 18 5.229,5.385 5.448,5.542 0.219,0.156 10 false 28 5.219,6.698 5.438,6.854 0.219,0.156 10 false 20 5.219,7.083 5.438,7.24 0.219,0.156 10 false 29 5.219,7.479 5.438,7.635 0.219,0.156 10 false 21 1.625,0.5 2.042,0.667 0.417,0.167 10 false VCP2 5.542,0.51 5.958,0.677 0.417,0.167 10 false VCP2 1.625,0.865 2.042,1.031 0.417,0.167 10 false EPA2 5.542,0.875 5.958,1.042 0.417,0.167 10 false EPA2 1.625,1.24 2.042,1.406 0.417,0.167 10 false VPA2 5.542,1.25 5.958,1.417 0.417,0.167 10 false VPA2 1.604,1.615 2.042,1.781 0.438,0.167 10 false VCPA 5.542,1.615 5.979,1.781 0.438,0.167 10 false VCPA 1.688,1.99 2.042,2.156 0.354,0.167 10 false EPA 5.542,1.99 5.896,2.156 0.354,0.167 10 false EPA 1.688,2.354 2.042,2.521 0.354,0.167 10 false VPA 5.542,2.365 5.896,2.531 0.354,0.167 10 false VPA 5.219,2.188 5.438,2.344 0.219,0.156 10 false 28 1.698,3.594 2.052,3.76 0.354,0.167 10 false VCS 5.542,3.615 5.896,3.781 0.354,0.167 10 false VCS 1.729,3.99 2.052,4.156 0.323,0.167 10 false PR2 5.542,6.865 5.948,7.031 0.406,0.167 10 false EVLU 1.74,4.396 2.052,4.563 0.313,0.167 10 false E2S 5.542,4.396 5.854,4.563 0.313,0.167 10 false E2S 1.823,4.781 2.052,4.948 0.229,0.167 10 false E2 5.542,4.781 5.875,4.948 0.333,0.167 10 false E2M 1.823,5.177 2.052,5.344 0.229,0.167 10 false PR 5.542,5.177 5.948,5.354 0.406,0.177 10 false PCR1 1.823,5.563 2.052,5.729 0.229,0.167 10 false VC 5.542,5.573 5.885,5.74 0.344,0.167 10 false VCM 1.823,6.865 2.052,7.031 0.229,0.167 10 false E2 1.823,7.26 2.052,7.427 0.229,0.167 10 false VC 5.542,7.656 5.854,7.823 0.313,0.167 10 false VLU 5.542,7.26 5.948,7.427 0.406,0.167 10 false VCVL 5.542,3.99 5.948,4.156 0.406,0.167 10 false PCR2 1.74,7.656 2.052,7.823 0.313,0.167 10 false VTA 5.177,4.781 5.635,4.979 0.458,0.198 10 false C40

A348660E09
5.24,0.625 5.552,0.792 0.313,0.167 10 false C40 5.25,1 5.563,1.167 0.313,0.167 10 false C40 5.25,1.375 5.563,1.542 0.313,0.167 10 false C40 5.25,1.74 5.563,1.906 0.313,0.167 10 false C40 5.25,2.104 5.563,2.271 0.313,0.167 10 false C40 5.26,3.531 5.573,3.698 0.313,0.167 10 false C38 5.25,3.917 5.563,4.083 0.313,0.167 10 false C38 5.25,4.323 5.563,4.49 0.313,0.167 10 false C38 5.24,5.802 5.552,5.969 0.313,0.167 10 false C40 5.24,6.198 5.552,6.365 0.313,0.167 10 false C40 5.25,6.594 5.563,6.76 0.313,0.167 10 false C40 6.042,9.479 6.396,9.646 0.354,0.167 10 false ECM 0.406,2.5 0.719,2.667 0.313,0.167 10 false C37 0.427,4.781 0.74,4.948 0.313,0.167 10 false C53 0.427,7.042 0.74,7.208 0.313,0.167 10 false C55 0.406,2.656 2.74,2.865 2.333,0.208 10 false Electric EGR Conrol Valve Assembly 0.427,4.948 2.625,5.125 2.198,0.177 10 false Manifold Absolute Pressure Sensor 0.438,7.198 2.271,7.385 1.833,0.188 10 false Nozzle Vane Position Sensor 2.156,0.729 2.313,0.927 0.156,0.198 10 false 1 2.188,3.646 2.344,3.844 0.156,0.198 10 false 1 2.167,1.104 2.323,1.302 0.156,0.198 10 false 2 2.177,1.479 2.333,1.677 0.156,0.198 10 false 3 2.177,1.844 2.333,2.042 0.156,0.198 10 false 4 2.177,2.229 2.333,2.427 0.156,0.198 10 false 5 2.198,4.042 2.354,4.24 0.156,0.198 10 false 2 2.198,4.438 2.354,4.635 0.156,0.198 10 false 3 2.188,5.917 2.344,6.115 0.156,0.198 10 false 1 2.188,6.313 2.344,6.51 0.156,0.198 10 false 2 2.188,6.708 2.344,6.906 0.156,0.198 10 false 3 5.635,0.625 6.063,0.802 0.427,0.177 10 false EEGL 5.625,1 6.052,1.177 0.427,0.177 10 false EGLS 5.625,1.365 6.083,1.542 0.458,0.177 10 false VCEG 5.615,1.74 6.063,1.917 0.448,0.177 10 false EGM+ 5.615,2.115 6.063,2.292 0.448,0.177 10 false EGM- 1.875,0.625 2.125,0.781 0.25,0.156 10 false E2 1.792,1.01 2.094,1.177 0.302,0.167 10 false VTA 1.865,1.375 2.115,1.542 0.25,0.167 10 false VC 1.865,1.75 2.115,1.917 0.25,0.167 10 false M+ 1.865,2.115 2.115,2.281 0.25,0.167 10 false M- 5.271,0.417 5.448,0.615 0.177,0.198 10 false 24 5.281,0.813 5.458,1.01 0.177,0.198 10 false 25 5.281,1.188 5.458,1.385 0.177,0.198 10 false 31 5.313,1.563 5.469,1.76 0.156,0.198 10 false 6 5.333,1.938 5.49,2.135 0.156,0.198 10 false 7 5.292,3.333 5.49,3.521 0.198,0.188 10 false 19 5.281,3.74 5.479,3.927 0.198,0.188 10 false 18 5.292,4.125 5.49,4.313 0.198,0.188 10 false 28 5.281,5.604 5.479,5.792 0.198,0.188 10 false 30 5.292,6 5.49,6.188 0.198,0.188 10 false 22 5.281,6.406 5.479,6.594 0.198,0.188 10 false 23 5.615,3.521 6.01,3.698 0.396,0.177 10 false EPIM 5.625,3.917 5.917,4.094 0.292,0.177 10 false PIM 5.625,4.313 6.063,4.49 0.438,0.177 10 false VCPM 1.958,3.552 2.125,3.729 0.167,0.177 10 false E 1.844,3.927 2.135,4.104 0.292,0.177 10 false PIM 1.896,4.313 2.146,4.479 0.25,0.167 10 false VC 5.625,5.802 6.063,5.979 0.438,0.177 10 false VNVC 5.625,6.208 6.031,6.375 0.406,0.167 10 false VNE2 1.719,6.594 2.094,6.771 0.375,0.177 10 false VTA1 1.677,5.823 2.115,6 0.438,0.177 10 false VNVC 1.708,6.208 2.115,6.375 0.406,0.167 10 false VNE2 5.625,6.604 5.969,6.771 0.344,0.167 10 false VNA 0.51,9.49 2.344,9.677 1.833,0.188 10 false Clutch Stroke Sensor 0.51,9.333 0.823,9.5 0.313,0.167 10 false A67 1.792,8.083 2.229,8.26 0.438,0.177 10 false C+B 1.792,8.479 2.229,8.656 0.438,0.177 10 false CSS 1.844,8.875 2.281,9.052 0.438,0.177 10 false C-S 2.188,9 2.344,9.198 0.156,0.198 10 false 1 2.188,8.594 2.344,8.792 0.156,0.198 10 false 2 2.188,8.198 2.344,8.396 0.156,0.198 10 false 3 5.625,8.073 6.063,8.25 0.438,0.177 10 false VCCL 5.625,8.469 6.063,8.646 0.438,0.177 10 false CLS 5.625,8.865 6.063,9.042 0.438,0.177 10 false E2CL 5.25,8.865 5.563,9.031 0.313,0.167 10 false G50 5.24,8.469 5.552,8.635 0.313,0.167 10 false G50 5.25,8.073 5.563,8.24 0.313,0.167 10 false G50 5.302,7.885 5.5,8.073 0.198,0.188 10 false 23 5.292,8.271 5.49,8.458 0.198,0.188 10 false 20 5.281,8.677 5.479,8.865 0.198,0.188 10 false 21

A348661E06
5.917,7.458 6.323,7.635 0.406,0.177 10 false ECM 5.167,0.781 5.563,0.99 0.396,0.208 10 false C39 5.167,1.156 5.479,1.323 0.313,0.167 10 false C39 5.167,1.521 5.552,1.698 0.385,0.177 10 false C39 5.167,1.896 5.583,2.104 0.417,0.208 10 false C39 5.177,3.375 5.49,3.542 0.313,0.167 10 false C41 5.177,3.76 5.615,3.948 0.438,0.188 10 false C41 5.177,4.167 5.604,4.375 0.427,0.208 10 false C41 5.167,5.74 5.656,5.906 0.49,0.167 10 false C41 5.167,6.125 5.583,6.323 0.417,0.198 10 false C41 5.167,6.521 5.594,6.719 0.427,0.198 10 false C41 0.406,2.354 0.896,2.573 0.49,0.219 10 false A29 0.396,2.5 3.063,2.917 2.667,0.417 10 false Mass Air Flow Meter Sub-assembly 0.427,4.635 0.646,4.802 0.219,0.167 10 false Z1 0.417,4.781 2.156,4.969 1.74,0.188 10 false Crankshaft Position Sensor 0.417,6.99 0.833,7.167 0.417,0.177 10 false C43 0.417,7.146 2.083,7.344 1.667,0.198 10 false Camshaft Position Sensor 2.104,0.698 2.271,0.875 0.167,0.177 10 false 1 2.104,1.063 2.271,1.24 0.167,0.177 10 false 2 2.104,1.438 2.271,1.615 0.167,0.177 10 false 3 2.104,1.813 2.271,1.99 0.167,0.177 10 false 4 2.125,3.292 2.292,3.469 0.167,0.177 10 false 1 2.125,3.688 2.292,3.865 0.167,0.177 10 false 2 2.125,4.063 2.292,4.24 0.167,0.177 10 false 3 2.115,5.646 2.281,5.823 0.167,0.177 10 false 1 2.115,6.031 2.281,6.208 0.167,0.177 10 false 2 2.115,6.438 2.281,6.615 0.167,0.177 10 false 3 5.208,0.604 5.396,0.781 0.188,0.177 10 false 33 5.208,0.979 5.396,1.156 0.188,0.177 10 false 24 5.219,1.354 5.406,1.531 0.188,0.177 10 false 25 5.219,1.729 5.406,1.906 0.188,0.177 10 false 32 5.219,3.198 5.406,3.375 0.188,0.177 10 false 28 5.208,3.594 5.396,3.771 0.188,0.177 10 false 19 5.219,3.99 5.406,4.167 0.188,0.177 10 false 20 5.198,5.948 5.385,6.125 0.188,0.177 10 false 18 5.219,5.552 5.406,5.729 0.188,0.177 10 false 27 5.198,6.354 5.385,6.531 0.188,0.177 10 false 17 5.552,0.792 5.813,0.958 0.26,0.167 10 false VG 5.552,1.156 5.896,1.323 0.344,0.167 10 false EVG 5.552,1.531 5.99,1.698 0.438,0.167 10 false VCVG 5.563,1.906 5.885,2.073 0.323,0.167 10 false THA 1.792,0.771 2.052,0.938 0.26,0.167 10 false FG 1.74,1.156 2.052,1.323 0.313,0.167 10 false E2G 1.813,1.531 2.052,1.698 0.24,0.167 10 false 5V 1.729,1.896 2.052,2.063 0.323,0.167 10 false THA 5.552,3.375 5.875,3.542 0.323,0.167 10 false NE+ 5.552,3.771 5.875,3.938 0.323,0.167 10 false NE- 1.74,3.365 2.063,3.531 0.323,0.167 10 false NE+ 1.75,3.76 2.073,3.927 0.323,0.167 10 false NE- 1.813,4.167 2.073,4.323 0.26,0.156 10 false VC 5.552,4.177 6.01,4.354 0.458,0.177 10 false VCNE 5.552,5.74 5.875,5.906 0.323,0.167 10 false G2+ 1.677,5.729 2.177,5.917 0.5,0.188 10 false G22+ 5.552,6.125 5.875,6.292 0.323,0.167 10 false G2- 1.698,6.115 2.125,6.313 0.427,0.198 10 false G22- 1.792,6.521 2.052,6.677 0.26,0.156 10 false VC 5.563,6.521 5.927,6.688 0.365,0.167 10 false VCG

CAUTION / NOTICE / HINT

NOTICE:
·

Check the fuses for circuits related to this system before performing the following inspection procedure.

·

After replacing the ECM, the new ECM needs registration (Click here Engine / Hybrid System>1GD-FTV ENGINE CONTROL>ECD SYSTEM>REGISTRATION) and initialization (Click here Engine / Hybrid System>1GD-FTV ENGINE CONTROL>ECD SYSTEM>INITIALIZATION).



PROCEDURE

1.CHECK CONNECTION BETWEEN GTS AND ECM
a.

Connect the GTS to the DLC3.


b.

Turn the engine switch on (IG).


c.

Turn the GTS on.


d.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is not possible A
Communication is possible B



A

2.CHECK TERMINAL VOLTAGE (POWER SOURCE OF ECM)

B

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

2.CHECK TERMINAL VOLTAGE (POWER SOURCE OF ECM)
A348466C28
2.833,0.365 3.208,0.615 0.375,0.25 2.156,1.729 3.021,1 true 2.656,1.729 3.083,1 true 3.135,1.74 3.156,1.01 true 2.896,0.406 3.24,0.615 0.344,0.208 10 false G50 2.927,1.75 3.396,1.969 0.469,0.219 10 false 2 (+B) 2.365,1.75 2.885,1.958 0.521,0.208 10 false 3 (+B2) 1.813,1.75 2.333,1.958 0.521,0.208 10 false 4 (+B3) 0.073,0.063 0.385,0.26 0.313,0.198 10 false *a
*a Component with harness connected
(to ECM)


a.

Turn the engine switch on (IG).


b.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Condition Specified Condition
G50-2 (+B) - Body ground Engine switch on (IG) 11 to 14 V
G50-3 (+B2) - Body ground Engine switch on (IG) 11 to 14 V
G50-4 (+B3) - Body ground Engine switch on (IG) 11 to 14 V


HINT:

If the result is not as specified, since current is not flowing to the +B, +B2 and +B3 terminals of the ECM, the system may not be started.



Result:
Proceed to
OK
NG



OK

3.CHECK CONNECTION BETWEEN GTS AND ECM (CAMSHAFT POSITION SENSOR)

NG

3.CHECK CONNECTION BETWEEN GTS AND ECM (CAMSHAFT POSITION SENSOR)
a.

Disconnect the camshaft position sensor connector.


b.

Turn the engine switch on (IG).


c.

Turn the GTS on.


d.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.


Result:
Result Proceed to
Communication is possible A
Communication is not possible B



e.

Reconnect the camshaft position sensor connector.



A

B

4.CHECK CONNECTION BETWEEN GTS AND ECM (MANIFOLD ABSOLUTE PRESSURE SENSOR)
4.CHECK CONNECTION BETWEEN GTS AND ECM (MANIFOLD ABSOLUTE PRESSURE SENSOR)
a.

Disconnect the manifold absolute pressure sensor connector.


b.

Turn the engine switch on (IG).


c.

Turn the GTS on.


d.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is possible A
Communication is not possible B


e.

Reconnect the manifold absolute pressure sensor connector.



A

B

5.CHECK CONNECTION BETWEEN GTS AND ECM (MASS AIR FLOW METER SUB-ASSEMBLY)
5.CHECK CONNECTION BETWEEN GTS AND ECM (MASS AIR FLOW METER SUB-ASSEMBLY)
a.

Disconnect the mass air flow meter sub-assembly connector.


b.

Turn the engine switch on (IG).


c.

Turn the GTS on.


d.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is possible A
Communication is not possible B


e.

Reconnect the mass air flow meter sub-assembly connector.



A

REPLACE MASS AIR FLOW METER SUB-ASSEMBLY

B

6.CHECK CONNECTION BETWEEN GTS AND ECM (NOZZLE VANE POSITION SENSOR)
6.CHECK CONNECTION BETWEEN GTS AND ECM (NOZZLE VANE POSITION SENSOR)
a.

Disconnect the nozzle vane position sensor connector.


b.

Turn the engine switch on (IG).


c.

Turn the GTS on.


d.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is possible A
Communication is not possible B


e.

Reconnect the nozzle vane position sensor connector.



A

REPLACE TURBOCHARGER NOZZLE VANE CONTROL ACTUATOR

B

7.CHECK CONNECTION BETWEEN GTS AND ECM (ELECTRIC EGR CONTROL VALVE ASSEMBLY)
7.CHECK CONNECTION BETWEEN GTS AND ECM (ELECTRIC EGR CONTROL VALVE ASSEMBLY)
a.

Disconnect the electric EGR control valve assembly connector.


b.

Turn the engine switch on (IG).


c.

Turn the GTS on.


d.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is possible A
Communication is not possible B


e.

Reconnect the electric EGR control valve assembly connector.



A

REPLACE ELECTRIC EGR CONTROL VALVE ASSEMBLY

B

8.CHECK CONNECTION BETWEEN GTS AND ECM (ACCELERATOR PEDAL POSITION SENSOR)
8.CHECK CONNECTION BETWEEN GTS AND ECM (ACCELERATOR PEDAL POSITION SENSOR)
a.

Disconnect the accelerator pedal position sensor connector.


b.

Turn the engine switch on (IG).


c.

Turn the GTS on.


d.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is possible A
Communication is not possible B


e.

Reconnect the accelerator pedal position sensor connector.



A

REPLACE ACCELERATOR PEDAL SENSOR ASSEMBLY

B

9.CHECK CONNECTION BETWEEN GTS AND ECM (FUEL PRESSURE SENSOR)
9.CHECK CONNECTION BETWEEN GTS AND ECM (FUEL PRESSURE SENSOR)
a.

Disconnect the fuel pressure sensor connector.


b.

Turn the engine switch on (IG).


c.

Turn the GTS on.


d.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is possible A
Communication is not possible B


e.

Reconnect the fuel pressure sensor connector.



A

REPLACE COMMON RAIL ASSEMBLY

B

10.CHECK CONNECTION BETWEEN GTS AND ECM (DIESEL THROTTLE BODY ASSEMBLY)
10.CHECK CONNECTION BETWEEN GTS AND ECM (DIESEL THROTTLE BODY ASSEMBLY)
a.

Disconnect the diesel throttle body assembly connector.


b.

Turn the engine switch on (IG).


c.

Turn the GTS on.


d.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is possible A
Communication is not possible B


e.

Reconnect the diesel throttle body assembly connector.



A

REPLACE DIESEL THROTTLE BODY ASSEMBLY

B

11.CHECK CONNECTION BETWEEN GTS AND ECM (CRANKSHAFT POSITION SENSOR)
11.CHECK CONNECTION BETWEEN GTS AND ECM (CRANKSHAFT POSITION SENSOR)
a.

Disconnect the crankshaft position sensor connector.


b.

Turn the engine switch on (IG).


c.

Turn the GTS on.


d.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is possible A
Communication is not possible B


e.

Reconnect the crankshaft position sensor connector.



A

B

12.CHECK CONNECTION BETWEEN GTS AND ECM (CLUTCH STROKE SENSOR)
12.CHECK CONNECTION BETWEEN GTS AND ECM (CLUTCH STROKE SENSOR)
a.

Disconnect the clutch stroke sensor connector.


b.

Turn the engine switch on (IG).


c.

Turn the GTS on.


d.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is possible A
Communication is notpossible B


e.

Reconnect the clutch stroke sensor connector.



A

REPLACE MASTER CYLINDER ASSEMBLY

B

13.CHECK HARNESS AND CONNECTOR
13.CHECK HARNESS AND CONNECTOR
a.

Disconnect the camshaft position sensor connector.


b.

Disconnect the manifold absolute pressure sensor connector.


c.

Disconnect the mass air flow meter sub-assembly connector.


d.

Disconnect the nozzle vane position sensor connector.


e.

Disconnect the electric EGR control valve assembly connector.


f.

Disconnect the accelerator pedal sensor assembly connector.


g.

Disconnect the fuel pressure sensor connector.


h.

Disconnect the diesel throttle body assembly connector.


i.

Disconnect the crankshaft position sensor connector.


j.

Disconnect the clutch stroke sensor connector.


k.

Disconnect the ECM connectors.


l.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
G50-29 (VCPA) - Body ground and other terminals Always 10 kΩ or higher
G50-30 (VCP2) - Body ground and other terminals Always 10 kΩ or higher
C40-28 (VCM) - Body ground and other terminals Always 10 kΩ or higher
C41-33 (VCS) - Body ground and other terminals Always 10 kΩ or higher
C40-29 (VCVL) - Body ground and other terminals Always 10 kΩ or higher
C40-31 (VCEG) - Body ground and other terminals Always 10 kΩ or higher
C38-28 (VCPM) - Body ground and other terminals Always 10 kΩ or higher
C40-30 (VNVC) - Body ground and other terminals Always 10 kΩ or higher
C39-25 (VCVG) - Body ground and other terminals Always 10 kΩ or higher
C41-17 (VCG) - Body ground and other terminals Always 10 kΩ or higher
C41-20 (VCNE) - Body ground and other terminals Always 10 kΩ or higher
G50-23 (VCCL) - Body ground and other terminals Always 10 kΩ or higher
G50-2 (+B) - Body ground and other terminals Always 10 kΩ or higher
G50-3 (+B2) - Body ground and other terminals Always 10 kΩ or higher
G50-4 (+B3) - Body ground and other terminals Always 10 kΩ or higher



m.

Reconnect the clutch stroke sensor connector.


n.

Reconnect the crankshaft position sensor connector.


o.

Reconnect the diesel throttle body assembly connector.


p.

Reconnect the fuel pressure sensor connector.


q.

Reconnect the accelerator pedal sensor assembly connector.


r.

Reconnect the electric EGR control valve assembly connector.


s.

Reconnect the nozzle vane position sensor connector.


t.

Reconnect the mass air flow meter sub-assembly connector.


u.

Reconnect the manifold absolute pressure sensor connector.


v.

Reconnect the camshaft position sensor connector.


w.

Reconnect the ECM connectors.


Result:
Proceed to
OK
NG



OK

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR