Home › Power Source / Network › 2KD-FTV BATTERY / CHARGING › GENERATOR › from 2016.01
RM3270E _57 Power Source / Network _048965 2KD-FTV BATTERY / CHARGING _0239235 GENERATOR A

2KD-FTV BATTERY / CHARGING  GENERATOR  INSTALLATION  


PROCEDURE

Hide 27020 1.INSTALL GENERATOR ASSEMBLY

A355369N01
2.438,1.208 2.594,1.406 0.156,0.198 10 true A 2.396,3 2.552,3.198 0.156,0.198 10 true B

a.

Install the generator assembly with the 2 bolts.

Torque:
for bolt A : 62 N*m (632 kgf*cm, 46 ft.*lbf)
for bolt B : 25 N*m (255 kgf*cm, 18 ft.*lbf)


b.

Connect the generator connector.


c.

Install the generator wire with the nut to terminal B.

Torque:
9.8 N*m (100 kgf*cm, 87 in.*lbf)


Hide 2.INSTALL NO. 2 IDLER PULLEY ASSEMBLY

a.
A355368

Install the spacer, No. 2 idle pulley assembly and 2 pulley plates with the bolt.

Torque:
45 N*m (459 kgf*cm, 33 ft.*lbf)


Hide 16361A 3.INSTALL FAN AND GENERATOR V BELT

Hide 17801 5.INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

Hide 17705 6.INSTALL AIR CLEANER CAP SUB-ASSEMBLY WITH AIR CLEANER HOSE

Hide 7.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION