Home › Engine / Hybrid System › 5L-E LUBRICATION › OIL PRESSURE SWITCH › from 2016.01
RM3270E _51 Engine / Hybrid System _048956 5L-E LUBRICATION _0239316 OIL PRESSURE SWITCH A

5L-E LUBRICATION  OIL PRESSURE SWITCH  INSTALLATION  


PROCEDURE

Hide 83530 1.INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY

a.

Apply adhesive to 2 or 3 threads of the engine oil pressure switch assembly.

Adhesive:

Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent


NOTICE:

Do not apply adhesive to the oil inlet port of the engine oil pressure switch assembly.



b.

Using a 24 mm deep socket wrench, install the engine oil pressure switch assembly to the cylinder block sub-assembly.

Torque:
15 N*m (153 kgf*cm, 11 ft.*lbf)

NOTICE:

Do not start the engine within 1 hour of installation.



c.

Connect the connector to the engine oil pressure switch assembly.


Hide 29300A 2.CONNECT VACUUM PUMP OIL INLET HOSE

Hide 17881 3.INSTALL NO. 1 AIR CLEANER HOSE