15710
1.INSTALL OIL COOLER ASSEMBLY
Install 2 new gaskets and the oil cooler assembly to the oil filter bracket sub-assembly with the 4 nuts.
15609
2.INSTALL OIL FILTER BRACKET SUB-ASSEMBLY
Install a new gasket and the oil filter bracket sub-assembly to the cylinder block sub-assembly with the 11 bolts and 2 nuts.
15601
3.INSTALL OIL FILTER SUB-ASSEMBLY
29300A
4.CONNECT VACUUM PUMP OIL INLET HOSE
| *a | Stopper Bar |
Connect the vacuum pump oil inlet hose to the cylinder block sub-assembly with 2 new gaskets and the union bolt.
When tightening the vacuum pump oil inlet hose, hang the stopper bar of the vacuum pump oil inlet hose on the filter bracket sub-assembly to prevent the vacuum pump oil inlet hose from rotating.
17141
5.INSTALL EXHAUST MANIFOLD
27020
6.INSTALL GENERATOR ASSEMBLY
7.ADD ENGINE OIL
8.ADD ENGINE COOLANT
9.INSPECT FOR OIL LEAK
10.INSPECT FOR COOLANT LEAK
11.INSPECT FOR EXHAUST GAS LEAK