Home › Engine / Hybrid System › 1GR-FE COOLING › WATER PUMP › from 2016.01
RM3270E _51 Engine / Hybrid System _048951 1GR-FE COOLING _0241386 WATER PUMP A

1GR-FE COOLING  WATER PUMP  INSTALLATION  


PROCEDURE

Hide 16100 1.INSTALL ENGINE WATER PUMP ASSEMBLY

A340118C01
1.365,0.792 1.521,0.99 0.156,0.198 10 false -
V100135

Bolt A
V100136

Bolt B


a.

Install a new gasket and the engine water pump assembly to the timing chain cover sub-assembly with the 17 bolts.

Torque:
for bolt A : 21 N*m (214 kgf*cm, 15 ft.*lbf)
for bolt B : 11 N*m (112 kgf*cm, 8 ft.*lbf)


Hide 16604 2.INSTALL NO. 2 IDLER PULLEY SUB-ASSEMBLY

a.

w/ Idler Pulley Cover Plate:

i.

Install the 2 idler pulley cover plates, 2 No. 2 idler pulleys and 2 No. 2 idler pulley cover plates with the 2 bolts.

Torque:
54 N*m (551 kgf*cm, 40 ft.*lbf)



b.

w/o Idler Pulley Cover Plate:

i.

Install the 2 No. 2 idler pulleys and 2 No. 2 idler pulley cover plates with the 2 bolts.

Torque:
54 N*m (551 kgf*cm, 40 ft.*lbf)



c.

for Integrated Type:

i.

Install the 2 No. 2 idler pulleys with the 2 bolts.

Torque:
54 N*m (551 kgf*cm, 40 ft.*lbf)



Hide 16620 3.INSTALL V-RIBBED BELT TENSIONER ASSEMBLY

Hide 4.INSTALL WATER INLET ASSEMBLY

a.

Install a new O-ring to the water outlet pipe.


b.

Install a new gasket to the engine water pump assembly.


c.

Apply soapy water to the O-ring.


d.

Install the water inlet assembly to the timing chain cover sub-assembly with the 5 bolts.

Torque:
9.0 N*m (92 kgf*cm, 80 in.*lbf)


e.

Connect the water by-pass hose, No. 2 water by-pass hose, No. 3 water by-pass hose, No. 4 water by-pass hose and No. 5 water by-pass hose to the water inlet assembly, and slide the 5 hose clamps to secure the hose.


f.

Connect the radiator hose inlet and radiator hose outlet to the water inlet assembly, and slide the 2 hose clamps to secure the hose.