1.REMOVE REAR WHEEL
42403
2.REMOVE REAR BRAKE DRUM SUB-ASSEMBLY (for Rear Drum Brake)
47850
3.DISCONNECT REAR DISC BRAKE CYLINDER ASSEMBLY LH (for Rear Disc Brake)
47830
4.DISCONNECT REAR DISC BRAKE CYLINDER ASSEMBLY RH (for Rear Disc Brake)
Use the same procedure described for the LH side.
42431
5.REMOVE REAR DISC LH (for Rear Disc Brake)
42431
6.INSTALL REAR DISC RH (for Rear Disc Brake)
Use the same procedure described for the LH side.
7.REMOVE PARKING BRAKE LEVER SUB-ASSEMBLY
8.REMOVE FRONT SEAT ASSEMBLY (for Power Seat)
9.REMOVE FRONT SEAT ASSEMBLY (for Manual Seat)
67914B
10.REMOVE FRONT DOOR SCUFF PLATE LH
67913B
11.REMOVE FRONT DOOR SCUFF PLATE RH
67918E
12.REMOVE REAR DOOR SCUFF PLATE LH
67917C
13.REMOVE REAR DOOR SCUFF PLATE RH
62414A
14.REMOVE LOWER CENTER PILLAR GARNISH LH
62413A
15.REMOVE LOWER CENTER PILLAR GARNISH RH
46334
16.REMOVE INTERMEDIATE LEVER PROTECTOR
Partially remove the floor carpet.
It is not necessary to fully remove the floor carpet. Partially remove it so that the intermediate lever protector can be removed in a later step.
Remove the 3 bolts and intermediate lever protector with No. 2 console box mounting bracket.
58996A
17.REMOVE NO. 2 CONSOLE BOX MOUNTING BRACKET
Remove the 2 bolts and No. 2 console box mounting bracket from the intermediate lever protector.
46439
18.REMOVE PARKING BRAKE CABLE HEAT INSULATOR
Remove the 2 bolts and parking brake cable heat insulator.
46439A
19.REMOVE NO. 2 PARKING BRAKE CABLE HEAT INSULATOR
Remove the 2 bolts and No. 2 parking brake cable heat insulator.
20.REMOVE PROPELLER SHAFT ASSEMBLY
for TSAM Made:
Click hereDrivetrain>DRIVE SHAFT / PROPELLER SHAFT>PROPELLER SHAFT ASSEMBLY(for TSAM Made)>REMOVAL
for TMT Made:
Click hereDrivetrain>DRIVE SHAFT / PROPELLER SHAFT>PROPELLER SHAFT ASSEMBLY(for TMT Made)>REMOVAL
for TMMIN Made:
Click hereDrivetrain>DRIVE SHAFT / PROPELLER SHAFT>PROPELLER SHAFT ASSEMBLY(for TMMIN Made)>REMOVAL
21.REMOVE FUEL TANK
1GR-FE:
Click hereEngine / Hybrid System>1GR-FE FUEL>FUEL TANK>REMOVAL
1KD-FTV:
Click hereEngine / Hybrid System>1KD-FTV FUEL>FUEL TANK>REMOVAL
1GD-FTV:
Click hereEngine / Hybrid System>1GD-FTV FUEL>FUEL TANK>REMOVAL
2TR-FE:
Click hereEngine / Hybrid System>1KD-FTV FUEL>FUEL TANK>REMOVAL
2GD-FTV:
Click hereEngine / Hybrid System>2GD-FTV FUEL>FUEL TANK>REMOVAL
2KD-FTV:
Click hereEngine / Hybrid System>2KD-FTV FUEL>FUEL TANK>REMOVAL
5L-E:
Click hereEngine / Hybrid System>5L-E FUEL>FUEL TANK>REMOVAL
46410
22.REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY
Remove the 2 bolts (labeled A).
| *1 | No. 1 Parking Brake Cable Assembly | *2 | No. 2 Parking Brake Cable Assembly |
| *3 | No. 3 Parking Brake Cable Assembly | *4 | Parking Brake Equalizer Sub-assembly |
| *5 | Cable Support Bracket | - | - |
Remove the clip and pin from the No. 3 parking brake cable assembly.
Disconnect the No. 1 parking brake cable assembly from the No. 3 parking brake cable assembly.
Disconnect the No. 1 parking brake cable assembly from the parking brake equalizer sub-assembly.
Disconnect the No. 1 parking brake cable assembly from the cable support bracket.
Remove the No. 1 parking brake cable assembly from inside the vehicle.
Remove the bolt (labeled B) and cable support bracket.
46420
23.REMOVE NO. 2 PARKING BRAKE CABLE ASSEMBLY
Disconnect the No. 2 parking brake cable assembly from the parking brake shoe lever.
for Rear Drum Brake:
Refer to the procedures up to the removal of the brake shoe.
Click hereBrake>BRAKE (REAR)>REAR BRAKE(for Rear Drum Brake)>DISASSEMBLY
for Rear Disc Brake:
Refer to the procedures up to the removal of the brake shoe.
Click hereBrake>PARKING BRAKE>PARKING BRAKE ASSEMBLY(for Rear Disc Brake)>DISASSEMBLY
Remove the 2 bolts and disconnect the No. 2 parking brake cable assembly from the backing plate.
| *A | for Rear Drum Brake | *B | for Rear Disc Brake |
Disconnect the No. 2 parking brake cable assembly from the parking brake equalizer sub-assembly.
| *1 | No. 2 Parking Brake Cable Assembly | *2 | Parking Brake Equalizer Sub-assembly |
Remove the 4 bolts and No. 2 parking brake cable assembly.
46304
24.REMOVE PARKING BRAKE EQUALIZER SUB-ASSEMBLY
Remove the 2 bolts and parking brake equalizer sub-assembly.
46430
25.REMOVE NO. 3 PARKING BRAKE CABLE ASSEMBLY
Disconnect the No. 3 parking brake cable assembly from the parking brake shoe lever.
for Rear Drum Brake:
Refer to the procedures up to the removal of the brake shoe.
Click hereBrake>BRAKE (REAR)>REAR BRAKE(for Rear Drum Brake)>DISASSEMBLY
for Rear Disc Brake:
Refer to the procedures up to the removal of the brake shoe.
Click hereBrake>PARKING BRAKE>PARKING BRAKE ASSEMBLY(for Rear Disc Brake)>DISASSEMBLY
Remove the 2 bolts and disconnect the No. 3 parking brake cable assembly from the backing plate.
| *A | for Rear Drum Brake | *B | for Rear Disc Brake |
Remove the clip.
| *1 | No. 3 Parking Brake Cable Assembly | - | - |
Remove the 4 bolts, nut and No. 3 parking brake cable assembly.