Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM(for Manual Air Conditioning System) › from 2016.01
RM3270E _58 Vehicle Interior _041713 HEATING / AIR CONDITIONING _0205065 AIR CONDITIONING SYSTEM(for Manual Air Conditioning System) U

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM(for Manual Air Conditioning System)  TERMINALS OF ECU  


AIR CONDITIONING AMPLIFIER ASSEMBLY (for Front)


E321904N03
3.354,0.375 3.854,0.625 0.5,0.25 3.438,0.417 4.052,0.615 0.615,0.198 10 false G131

a.

Disconnect the G131 air conditioning amplifier assembly connector.


b.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G131-1 (IG+) - Body ground G - Body ground Power source (IG) Ignition switch off Below 1 V
Ignition switch ON 11 to 14 V
G131-23 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω


c.

Reconnect the G131 air conditioning amplifier assembly connector.


d.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G131-2 (SWVC) - Body ground* B - Body ground Idle up switch operation signal
·

Engine running

·

Idle up switch: Off → on


Below 1 V → 11 to 14 V
G131-3 (HEAT) - Body ground G - Body ground Blower switch signal
·

Engine running

·

Blower switch: Off


Below 1 V
·

Engine running

·

Blower switch: LO or higher


11 to 14 V
G131-4 (TE) - Body ground P - Body ground No. 1 cooler thermistor signal Evaporator temperature (ambient): 0°C (32°F) 1.7 to 2.1 V
Evaporator temperature (ambient): 15°C (59°F) 1.0 to 1.3 V
Evaporator temperature (ambient): 20°C (68°F) 0.8 to 1.1 V
Evaporator temperature (ambient): 25°C (77°F) 0.6 to 0.9 V
Evaporator temperature (ambient): 30°C (86°F) 0.5 to 0.8 V
G131-5 (SG-2) - Body ground L - Body ground Ground for No. 1 cooler thermistor Always Below 1 Ω
G131-7 (A/C) - Body ground B - Body ground Blower switch signal
·

Ignition switch ON

·

Blower switch: LO or higher

·

"A/C" switch: On


11 to 14 V
·

Ignition switch ON

·

Blower switch: LO or higher

·

"A/C" switch: Off


Below 1 V
G131-8 (TX+) GR CAN communication line - -
G131-9 (TX-) W CAN communication line - -
G131-12 (AC1) - Body ground GR - Body ground Idle-up request signal
·

Engine running

·

Blower switch: LO or higher

·

"A/C" switch: Off


11 to 14 V
·

Engine running

·

Blower switch: LO or higher

·

"A/C" switch: On


Below 1 V
G131-13 (PTC1) - Body ground* L - Body ground Quick heater assembly operation signal
·

Engine starts

·

ECO mode switch: Off

·

Temperature settings: MAX HOT

·

Ambient temperature: 10°C (50°F) or lower

·

Engine coolant temperature: 64°C (147°F) or lower

·

Light control switch: Off

·

Blower switch: Off → on (after 10 seconds)


11 to 14 V → Below 1 V
G131-16 (MGC) - Body ground V - Body ground Cooler compressor assembly operation signal
·

Engine running

·

Blower switch: LO or higher

·

"A/C" switch: Off or on (magnet clutch off)


11 to 14 V
·

Engine running

·

Blower switch: LO or higher

·

"A/C" switch: On (magnet clutch on)


Below 1 V
G131-17 (PSW) - Body ground L - Body ground Air conditioner pressure sensor signal
·

Engine running

·

Refrigerant pressure normal


Below 1 V
·

Engine running

·

Refrigerant pressure abnormal (below 0.176 MPa [1.8 kgf/cm2, 25.5 psi] or higher than 3.025 MPa [30.9 kgf/cm2, 438.6 psi])


11 to 14 V
G131-18 (ACT) - Body ground LG - Body ground Magnet clutch on permit signal
·

Engine running

·

Blower switch: LO or higher

·

"A/C" switch: On (magnet clutch on)


4.5 to 5.5 V
·

Engine running

·

Blower switch: LO or higher

·

"A/C" switch off or on (magnet clutch off)


Below 1 V
G131-19 (PTC2) - Body ground* W - Body ground Quick heater assembly operation signal
·

Engine starts

·

ECO mode switch: Off

·

Temperature settings: MAX HOT

·

Ambient temperature: 10°C (50°F) or lower

·

Engine coolant temperature: 64°C (147°F) or lower

·

Light control switch: Off

·

Blower switch: Off → on (after 20 seconds)


11 to 14 V → Below 1 V
G131-20 (PTC3) - Body ground* SB - Body ground Quick heater assembly operation signal
·

Engine starts

·

ECO mode switch: Off

·

Temperature settings: MAX HOT

·

Ambient temperature: 10°C (50°F) or lower

·

Engine coolant temperature: 64°C (147°F) or lower

·

Light control switch: Off

·

Blower switch: Off → on (after 30 seconds)


11 to 14 V → Below 1 V

*: w/ PTC Heater