Home › Engine / Hybrid System › 1KD-FTV ENGINE MECHANICAL › DRIVE BELT › from 2016.01
RM3270E _51 Engine / Hybrid System _048915 1KD-FTV ENGINE MECHANICAL _0242482 DRIVE BELT A

1KD-FTV ENGINE MECHANICAL  DRIVE BELT  INSTALLATION  


PROCEDURE

Hide 16361A 1.INSTALL FAN AND GENERATOR V BELT

a.

Rotate the V-ribbed belt tensioner pulley clockwise, and then install the fan and generator V belt.

NOTICE:

Make sure that the fan and generator V belt is set properly on each pulley.



b.

Check that the indicator mark of the V-ribbed belt tensioner assembly.

Click hereEngine / Hybrid System>1KD-FTV ENGINE MECHANICAL>DRIVE BELT>ON-VEHICLE INSPECTION


Hide 51410 2.INSTALL NO. 1 ENGINE UNDER COVER