Home › Engine / Hybrid System › 1KD-FTV ENGINE MECHANICAL › DRIVE BELT › from 2016.01
RM3270E _51 Engine / Hybrid System _048915 1KD-FTV ENGINE MECHANICAL _0242482 DRIVE BELT G

1KD-FTV ENGINE MECHANICAL  DRIVE BELT  ON-VEHICLE INSPECTION  


CAUTION / NOTICE / HINT

CAUTION:
A343690

To prevent injury due to contact with an operating fan and generator V belt, keep your hands and clothing away from the fan and generator V belt when working in the engine compartment with the engine running.


PROCEDURE

Hide 16361A 1.INSPECT FAN AND GENERATOR V BELT

a.
B000543

Check the belt for wear, cracks or other signs of damage.

If any of the following defects is found, replace the fan and generator V belt.

·

The fan and generator V belt is cracked.

·

The fan and generator V belt is worn out to the extent that the cords are exposed.

·

The fan and generator V belt has chunks missing from the ribs.



b.
B000540C05
0.563,0.313 0.729,0.51 0.167,0.198 10 false *a 2.24,0.313 2.406,0.479 0.167,0.167 10 false *b
*a CORRECT
*b INCORRECT


Check that the fan and generator V belt fits properly in the ribbed grooves.

HINT:

Check with your hand to confirm that the fan and generator V belt has not slipped out of the grooves on the bottom of the pulley. If it has slipped out, replace the fan and generator V belt. Install a new fan and generator V belt correctly.



c.
A352015N01
0.615,0.417 0.375,0.24 0.375,0.24 0.281,0.24 false 0.823,0.49 0.979,0.219 0.979,0.219 1.167,0.219 true 1.198,0.104 1.344,0.281 0.146,0.177 10 true A 0.125,0.135 0.271,0.302 0.146,0.167 10 true B

Check that the V-ribbed belt tensioner indicator mark is within range B shown in the illustration.

If the mark is not within range B, replace the fan and generator V belt.

HINT:

If a new belt has been installed, check that the V-ribbed belt tensioner indicator mark is within range A.



Hide 16620 2.INSPECT V-RIBBED BELT TENSIONER ASSEMBLY

a.

Remove the fan and generator V belt.

Click hereEngine / Hybrid System>1KD-FTV ENGINE MECHANICAL>DRIVE BELT>REMOVAL


b.
A352172

Check that nothing gets caught in the V-ribbed belt tensioner assembly by turning it clockwise and counterclockwise.

If a malfunction exists, replace the V-ribbed belt tensioner assembly.


c.
A352173C01
2.104,0.583 2.333,0.75 0.229,0.167 10 true *a
*a Turn


Turn the pulley, and check that the tensioner bearing moves smoothly and quietly.

If necessary, replace the tensioner pulley.


d.

Install the fan and generator V belt.

Click hereEngine / Hybrid System>1KD-FTV ENGINE MECHANICAL>DRIVE BELT>INSTALLATION