Home › Engine / Hybrid System › 2GD-FTV EMISSION CONTROL › EMISSION CONTROL SYSTEM › from 2016.01
RM3270E _51 Engine / Hybrid System _048925 2GD-FTV EMISSION CONTROL _0242627 EMISSION CONTROL SYSTEM G

2GD-FTV EMISSION CONTROL  EMISSION CONTROL SYSTEM  ON-VEHICLE INSPECTION  


CAUTION / NOTICE / HINT

CAUTION:
A343690

To prevent injury due to contact with an operating fan and generator V belt or cooling fan, keep your hands and clothing away from the fan and generator V belt and cooling fans when working in the engine compartment with the engine running.


HINT:

When there is a malfunction which causes the EGR system to remain on, black or white smoke may be emitted from the exhaust pipe.


PROCEDURE

Hide 1.CHECK SEATING OF EGR VALVE

a.

Check that the engine starts and idles.


b.

Stop the engine.


Hide 25800 2.CHECK ELECTRIC EGR CONTROL VALVE ASSEMBLY OPERATION

a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON and turn the GTS on.


c.

Enter the following menus: Powertrain / Engine and ECT / Active Test / Control the EGR Step Position.


d.

Check the Data List.

Enter the following menus: Powertrain / Engine and ECT / Data List / Target EGR Valve Pos and Actual EGR Valve Pos

Powertrain > Engine and ECT > Active Test
Active Test Display
Control the EGR Step Position
Data List Display
Target EGR Valve Pos
Actual EGR Valve Pos
50004 234 95 821,822
OK:
Control Range Condition Specified Condition
Active Test performed (Set EGR position to 0% → 30% → 60% → 90% → 60% → 30% → 0%) Actual EGR valve opening percentage changes according to Active Test operation


If the result is not as specified, refer to DTC P042E.

Click hereEngine / Hybrid System>2GD-FTV ENGINE CONTROL>ECD SYSTEM>P042E


Hide 25630 3.INSPECT NO. 2 EGR VALVE ASSEMBLY

Hide 4.VISUALLY INSPECT HOSES, CONNECTIONS AND GASKETS

a.

Visually check that the hoses, connections and gaskets have no cracks, leaks or damage.

NOTICE:
·

Detachment or other problems with the engine oil level dipstick, oil filler cap sub-assembly, PCV hose or other components may cause the engine to run improperly.

·

Air suction caused by disconnections, looseness or cracks in the parts of the air induction system between the diesel throttle body assembly and cylinder head sub-assembly will cause engine failure or engine malfunctions.



If the result is not as specified, replace parts as necessary.