Home › Engine / Hybrid System › 2KD-FTV LUBRICATION › OIL PRESSURE SWITCH › from 2016.01
RM3270E _51 Engine / Hybrid System _048936 2KD-FTV LUBRICATION _0243278 OIL PRESSURE SWITCH A

2KD-FTV LUBRICATION  OIL PRESSURE SWITCH  INSTALLATION  


PROCEDURE

Hide 83530 1.INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY

a.

Apply adhesive to 2 or 3 threads of the engine oil pressure switch assembly.

Adhesive:

Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent


NOTICE:

Do not apply adhesive to the oil inlet port of the engine oil pressure switch assembly.



b.

Using a 24 mm deep socket wrench, install the engine oil pressure switch assembly to the oil cooler cover sub-assembly.

Torque:
15 N*m (153 kgf*cm, 11 ft.*lbf)

NOTICE:

Do not start the engine for at least 1 hour after the installation.



c.

Connect the connector to the engine oil pressure switch assembly.


Hide 51442 4.INSTALL NO. 2 ENGINE UNDER COVER