Home › Vehicle Interior › INTERIOR PANELS / TRIM › ROOF HEADLINING › from 2016.01
RM3270E _58 Vehicle Interior _041715 INTERIOR PANELS / TRIM _0213631 ROOF HEADLINING A

INTERIOR PANELS / TRIM  ROOF HEADLINING  REASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for RHD vehicles.



PROCEDURE

Hide 86101J 1.INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY

Hide 82171 2.INSTALL NO. 1 ROOF WIRE

a.

Fix the No. 1 roof wire in place with tape as shown in the illustration.

HINT:

Align the tape with the markings when attaching it.


B409951C02
2.667,2.583 3.406,2.583 true 3.406,2.5 3.625,2.656 0.219,0.156 10 true *a
*a Marking
V100155

Tape



b.

w/ Vanity Light:

i.
B364696

Turn the visor connectors approximately 90° clockwise to install them to the roof headlining assembly.



Hide 81340 3.INSTALL VANITY LIGHT ASSEMBLY (w/ Vanity Light)

HINT:

Use the same procedure for both vanity light assemblies.


a.
B399718C04
1.417,0.698 1.552,0.396 false 1.156,1.688 1.292,1.25 true 0.583,0.615 0.979,0.896 true 2.688,1.417 2.948,1.531 true 0.396,0.5 0.708,0.656 0.313,0.156 10 false *1 1.042,1.698 1.354,1.854 0.313,0.156 10 false *b 2.99,1.51 3.302,1.667 0.313,0.156 10 false *a 1.49,0.24 1.802,0.396 0.313,0.156 10 false *b
*1 Bulb Holder
*a Claw A
*b Claw B


Attach claw A of the vanity light assembly to temporarily install the vanity light assembly to the roof headlining assembly.


b.

Attach claw B of the bulb holder to install the vanity light assembly.


Hide 63610C 4.INSTALL NO. 1 AIR OUTLET REGISTER ASSEMBLY

HINT:

Use the same procedure for all No. 1 air outlet register assemblies.


a.
B409948

Attach the claw to install the No. 1 air outlet register assembly.


Hide 87201F 5.INSTALL NO. 3 AIR DUCT SUB-ASSEMBLY

a.
B409946

Install the No. 3 air duct sub-assembly with adhesive or double-sided tape.


Hide 87201B 6.INSTALL NO. 2 AIR DUCT SUB-ASSEMBLY

a.
B409944

Install the No. 2 air duct sub-assembly with adhesive or double-sided tape.


b.

Attach the clamp.


Hide 87201 7.INSTALL NO. 1 AIR DUCT SUB-ASSEMBLY

a.
B409945

Install the No. 1 air duct sub-assembly with adhesive or double-sided tape.


Hide 62653F 8.INSTALL ROOF HEADLINING PACKING

a.
B409936

Install a new roof headlining packing with double-sided tape.


Hide 63381 9.INSTALL FRONT HEADLINING RETAINER

a.
B409937

Install a new front headlining retainer with adhesive or double-sided tape.


Hide 63346 10.INSTALL NO. 6 ROOF SILENCER PAD

a.
B409943C01
2.104,1.677 2.896,1.583 true 2.938,1.479 3.156,1.635 0.219,0.156 10 true *a
*a Silencer Marking


Align the No. 6 roof silencer pad with the silencer markings on the roof headlining and install the No. 6 roof silencer pad using double-sided tape or adhesive as shown in the illustration.


Hide 63345 11.INSTALL NO. 5 ROOF SILENCER PAD

a.
B409942C01
2.115,0.885 2.708,0.75 true 2.698,0.625 2.906,0.781 0.208,0.156 10 true *a
*a Silencer Marking


Align the No. 5 roof silencer pad with the silencer markings on the roof headlining and install the No. 5 roof silencer pad using double-sided tape or adhesive as shown in the illustration.


Hide 63344 12.INSTALL NO. 4 ROOF SILENCER PAD

a.
B409941C01
2.125,0.635 2.813,0.479 true 2.792,0.375 3,0.531 0.208,0.156 10 true *a
*a Silencer Marking


Align the No. 4 roof silencer pad with the silencer markings on the roof headlining and install the No. 4 roof silencer pad using double-sided tape or adhesive as shown in the illustration.


Hide 63343 13.INSTALL NO. 3 ROOF SILENCER PAD

a.
B409940C01
2,0.448 2.875,0.219 true 2.042,2.802 2.552,2.802 true 2.885,0.104 3.104,0.26 0.219,0.156 10 true *a 2.552,2.708 2.771,2.865 0.219,0.156 10 true *a
*a Silencer Marking


Align the 2 No. 3 roof silencer pads with the silencer markings on the roof headlining and install the 2 No. 3 roof silencer pads using double-sided tape or adhesive as shown in the illustration.


Hide 63342 14.INSTALL NO. 2 ROOF SILENCER PAD

a.
B409939C01
2.427,1.719 2.938,1.563 true 2.938,1.458 3.146,1.615 0.208,0.156 10 true *a
*a Silencer Marking


Align the No. 2 roof silencer pad with the silencer markings on the roof headlining and install the No. 2 roof silencer pad using double-sided tape or adhesive as shown in the illustration.


Hide 63341 15.INSTALL NO. 1 ROOF SILENCER PAD

a.
B409938C01
1.813,2.125 2.458,1.958 true 2.448,1.844 2.677,2 0.229,0.156 10 true *a
*a Silencer Marking


Align the 2 No. 1 roof silencer pads with the silencer markings on the roof headlining and install the 2 No. 1 roof silencer pads using double-sided tape or adhesive as shown in the illustration.