77377
1.INSTALL FUEL FILLER OPENING LID LOCK RETAINER
|
Install in this Direction |
Install a new fuel filler opening lid lock retainer as shown in the illustration.
77035
2.INSTALL FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY
|
Install in this Direction |
Attach the claw to install the fuel lid lock control cable sub-assembly to the fuel filler opening lid lock retainer as shown in the illustration.
Attach the fuel lid lock control cable sub-assembly to each clamp as shown in the illustration.
| *A | for 4WD without VSC | - | - |
| *1 | Fuel Lid Lock Control Cable Sub-assembly | - | - |
77306
3.INSTALL FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY
Attach the claw to install the fuel lid lock open lever sub-assembly.
58510D
4.INSTALL FRONT FLOOR CARPET ASSEMBLY
Install the front floor carpet assembly.
62512
5.INSTALL QUARTER INSIDE TRIM BOARD LH
73233B
6.INSTALL REAR NO. 2 SEAT OUTER LAP BELT ANCHOR COVER
73233A
7.INSTALL REAR NO. 1 SEAT OUTER LAP BELT ANCHOR COVER
67935
8.INSTALL BACK DOOR SCUFF PLATE
62414A
9.INSTALL LOWER CENTER PILLAR GARNISH LH
73233
10.INSTALL OUTER LAP BELT ANCHOR COVER
67918E
11.INSTALL REAR DOOR SCUFF PLATE LH
62112
12.INSTALL COWL SIDE TRIM BOARD LH
67914B
13.INSTALL FRONT DOOR SCUFF PLATE LH
14.INSTALL REAR NO. 2 SEAT ASSEMBLY LH
15.INSTALL FRONT SEAT ASSEMBLY LH
for Manual Seat:
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>INSTALLATION
for Power Seat:
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Power Seat)>INSTALLATION