Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM(for Radio Receiver Type) › from 2016.01
RM3270E _56 Audio / Visual / Telematics _041699 AUDIO / VIDEO _0249874 AUDIO AND VISUAL SYSTEM(for Radio Receiver Type) J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio Receiver Type)  Steering Pad Switch Circuit  


DESCRIPTION

This circuit sends an operation signal from the steering pad switch assembly to the radio receiver assembly.

If there is an open in the circuit, the audio system cannot be operated using the steering pad switch assembly.

If there is a short in the circuit, the same condition as when the switch is continuously depressed occurs.

Therefore, the radio receiver assembly cannot be operated using the steering pad switch assembly, and the radio receiver assembly itself cannot function.

WIRING DIAGRAM

E345568E01
0.292,1.438 0.896,1.729 0.604,0.292 10 false Volume- 1.021,1.156 2.094,1.354 1.073,0.198 10 false Volume+ 1.823,1.167 2.594,1.365 0.771,0.198 10 false Seek- 2.51,1.188 3.281,1.385 0.771,0.198 10 false Seek+ 3.813,0.875 4.125,1.073 0.313,0.198 10 false z2 3.802,0.677 4.115,0.875 0.313,0.198 10 false 11 4.25,0.792 4.708,0.99 0.458,0.198 10 false AU1 4.802,0.896 5.115,1.094 0.313,0.198 10 false G4 4.833,0.688 4.99,0.885 0.156,0.198 10 false 6 5.823,0.771 6.135,0.969 0.313,0.198 10 false 21 6.135,0.896 6.594,1.094 0.458,0.198 10 false SW1 0.458,2.531 1.229,2.729 0.771,0.198 10 false Voice 1.021,2.26 2.25,2.458 1.229,0.198 10 false Off Hook 1.719,2.281 2.792,2.479 1.073,0.198 10 false On Hook 2.5,2.292 3.115,2.49 0.615,0.198 10 false Mode 3.802,1.99 4.115,2.188 0.313,0.198 10 false z2 3.844,1.802 4,2 0.156,0.198 10 false 8 4.271,1.875 4.729,2.073 0.458,0.198 10 false EAU 4.792,2 5.104,2.198 0.313,0.198 10 false G4 4.833,1.813 4.99,2.01 0.156,0.198 10 false 3 6.146,1.99 6.604,2.188 0.458,0.198 10 false SWG 5.833,1.896 6.146,2.094 0.313,0.198 10 false 23 3.813,3.104 4.125,3.302 0.313,0.198 10 false z2 3.802,2.906 4.115,3.104 0.313,0.198 10 false 10 4.271,2.99 4.729,3.188 0.458,0.198 10 false AU2 4.781,3.104 5.094,3.302 0.313,0.198 10 false G4 4.833,2.896 4.99,3.094 0.156,0.198 10 false 5 5.833,3 6.146,3.198 0.313,0.198 10 false 22 6.146,3.094 6.604,3.292 0.458,0.198 10 false SW2 0.656,3.594 2.771,3.833 2.115,0.24 10 false Steering Pad Switch Assembly 3.813,3.552 5.354,4.042 1.542,0.49 10 false Spiral with Sensor Cable Sub-assembly*1 6.021,3.865 7.052,4.281 1.031,0.417 10 false Radio Receiver Assembly 3.813,4.188 5.698,4.458 1.885,0.271 10 false Spiral Cable Sub-assembly*2 0.188,4.021 1.719,4.219 1.531,0.198 10 false *1: w/ VSC 0.177,4.385 1.865,4.583 1.688,0.198 10 false *2: w/o VSC 6,3.573 6.615,3.771 0.615,0.198 10 false G171

CAUTION / NOTICE / HINT

NOTICE:

The vehicle is equipped with a Supplemental Restraint System (SRS) which includes components such as airbags. Before servicing (including removal or installation of parts), be sure to read the precaution for Supplemental Restraint System.

for Type A: Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM(for Type A)>PRECAUTION

for Type B: Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM(for Type B)>PRECAUTION


PROCEDURE

1.INSPECT STEERING PAD SWITCH ASSEMBLY
a.

Remove the steering pad switch assembly.

Click hereSteering>STEERING COLUMN>STEERING PAD SWITCH>REMOVAL


b.

Inspect the steering pad switch assembly.

Click hereSteering>STEERING COLUMN>STEERING PAD SWITCH>INSPECTION


Result:
Proceed to
OK
NG



OK

2.INSPECT SPIRAL CABLE SUB-ASSEMBLY OR SPIRAL WITH SENSOR CABLE SUB-ASSEMBLY

NG

REPLACE STEERING PAD SWITCH ASSEMBLY

2.INSPECT SPIRAL CABLE SUB-ASSEMBLY OR SPIRAL WITH SENSOR CABLE SUB-ASSEMBLY

*1: w/ VSC

*2: w/o VSC


a.

Remove the spiral with sensor cable sub-assembly*1 or spiral cable sub-assembly*2.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>SPIRAL CABLE>REMOVAL


b.

Inspect the spiral with sensor cable sub-assembly*1 or spiral cable sub-assembly*2.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>SPIRAL CABLE>INSPECTION


Result:
Proceed to
OK
NG (w/ VSC)
NG (w/o VSC)



OK

3.CHECK HARNESS AND CONNECTOR (RADIO RECEIVER ASSEMBLY - SPIRAL CABLE SUB-ASSEMBLY OR SPIRAL WITH SENSOR CABLE SUB-ASSEMBLY)

NG (w/ VSC)

REPLACE SPIRAL WITH SENSOR CABLE SUB-ASSEMBLY

NG (w/o VSC)

REPLACE SPIRAL CABLE SUB-ASSEMBLY

3.CHECK HARNESS AND CONNECTOR (RADIO RECEIVER ASSEMBLY - SPIRAL CABLE SUB-ASSEMBLY OR SPIRAL WITH SENSOR CABLE SUB-ASSEMBLY)
a.

Disconnect the G171 radio receiver assembly connector.


b.

Disconnect the G4 spiral with sensor cable sub-assembly*1 or spiral cable sub-assembly*2 connector.

*1: w/ VSC

*2: w/o VSC



c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
G171-21 (SW1) - G4-6 (AU1) Always Below 1 Ω
G171-22 (SW2) - G4-5 (AU2) Always Below 1 Ω
G171-23 (SWG) - G4-3 (EAU) Always Below 1 Ω
G171-21 (SW1) or G4-6 (AU1) - Body ground Always 10 kΩ or higher
G171-22 (SW2) or G4-5 (AU2) - Body ground Always 10 kΩ or higher
G171-23 (SWG) or G4-3 (EAU) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR