Use the same procedure for RHD and LHD vehicles.
The procedures listed below are for RHD vehicles.
55667
1.REMOVE INSTRUMENT PANEL REGISTER BEZEL GARNISH (for Automatic Air Conditioning System)
55011A
2.REMOVE NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY (for Automatic Air Conditioning System)
55012A
3.REMOVE NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY (for Automatic Air Conditioning System)
55405B
4.REMOVE INSTRUMENT CENTER CLUSTER FINISH PANEL SUB-ASSEMBLY (for Automatic Air Conditioning System)
55900
5.REMOVE AIR CONDITIONING CONTROL ASSEMBLY (WINDOW DEFOGGER SWITCH) (for Automatic Air Conditioning System)
|
Place hand here |
|
Remove in this Direction |
Detach the clip and remove the air conditioning control assembly (window defogger switch).
Disconnect the 2 connectors.
55905J
6.REMOVE CONTROL KNOB SUB-ASSEMBLY (for Manual Air Conditioning System)
55667
7.REMOVE INSTRUMENT PANEL REGISTER BEZEL GARNISH (for Manual Air Conditioning System)
55011A
8.REMOVE NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY (for Manual Air Conditioning System)
55012A
9.REMOVE NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY (for Manual Air Conditioning System)
55405B
10.REMOVE INSTRUMENT CENTER CLUSTER FINISH PANEL SUB-ASSEMBLY (for Manual Air Conditioning System)
55905A
11.REMOVE HEATER CONTROL KNOB (for Manual Air Conditioning System)
84013A
12.REMOVE INTEGRATION PANEL SUB-ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY (WINDOW DEFOGGER SWITCH) (for Manual Air Conditioning System)
|
Place hand here |
|
Remove in this Direction |
Put protective tape around the integration panel sub-assembly.
Detach the clip and remove the integration panel sub-assembly with air conditioning control assembly (window defogger switch).
Disconnect the 3 connectors.
55906A
13.DISCONNECT DEFROSTER DAMPER CONTROL CABLE SUB-ASSEMBLY (for Manual Air Conditioning System)
Detach the claw and disconnect the defroster damper control cable sub-assembly.