Home › General › MAINTENANCE › BRAKE
RM1880E _V1 General _013208 MAINTENANCE _0068445 BRAKE N

MAINTENANCE  BRAKE  GENERAL MAINTENANCE  


PROCEDURE

Hide 1.INSPECT BRAKE PEDAL AND PARKING BRAKE

a.

Inspect the brake pedal and parking brake.

Type See procedure
Brake pedal See page (Click here)
Parking brake See page (Click here)


Hide 2.INSPECT BRAKE LINE PIPES AND HOSES

HINT:

Work in a well-lighted area. Turn the front wheels fully to the right or left before beginning the inspection.


a.
P009958

Using a mirror, check the entire circumference and length of the brake lines and hoses for:

·

Damage

·

Wear

·

Deformation

·

Cracks

·

Corrosion

·

Leaks

·

Bends

·

Twists



b.

Check all the clamps for tightness and the connections for leakage.


c.

Check that the hoses and lines are not near sharp edges, moving parts or the exhaust system.


d.

Check that the lines are installed properly and pass through the center of the grommets.


Hide 3.INSPECT BRAKE PADS AND DISCS

a.

Check the front brake pads and discs (See page Brake>BRAKE (FRONT)>FRONT BRAKE>INSPECTION).

HINT:
·

If a squealing or scraping noise is heard from the brake while driving, check the pad wear indicator.

·

If there are traces of the indicator contacting the disc rotor, the disc pad should be replaced.




Hide 4.INSPECT BRAKE LININGS AND DRUMS

a.

Check the rear brake linings and drums (See page Brake>BRAKE (REAR)>REAR BRAKE>INSPECTION).


Hide 5.INSPECT BRAKE FLUID

a.

Hide 6.REPLACE BRAKE FLUID

a.

Replace the brake fluid (See page Brake>BRAKE SYSTEM (OTHER)>BRAKE FLUID>REPLACEMENT).


Hide 7.INSPECT CLUTCH FLUID

a.

Inspect the clutch fluid (See page Drivetrain>CLUTCH>CLUTCH SYSTEM>BLEEDING).