Home › Engine / Hybrid System › 2TR-FE COOLING › RADIATOR
RM1880E _51 Engine / Hybrid System _013214 2TR-FE COOLING _0068494 RADIATOR A

2TR-FE COOLING  RADIATOR  REMOVAL  


PROCEDURE

Hide 3.DISCONNECT RADIATOR HOSE INLET

a.

Disconnect the radiator hose inlet from the radiator.


Hide 4.DISCONNECT RADIATOR HOSE OUTLET

a.

Disconnect the radiator hose outlet from the radiator.


Hide 6.DISCONNECT OIL COOLER INLET HOSE (for Automatic Transmission)

a.

Disconnect the oil cooler inlet hose from the radiator.


Hide 7.DISCONNECT OIL COOLER OUTLET HOSE (for Automatic Transmission)

a.

Disconnect the oil cooler outlet hose from the radiator.


Hide 8.REMOVE RADIATOR ASSEMBLY

a.
A253963

Using a clip remover, detach the 4 clamps from the radiator as shown in the illustration.

HINT:

Tape the clip remover tip before use.



b.
A099640

Remove the 4 bolts and radiator.