Home › Drivetrain › A343E AUTOMATIC TRANSMISSION / TRANSAXLE › SHIFT LEVER
RM1880E _52 Drivetrain _013217 A343E AUTOMATIC TRANSMISSION / TRANSAXLE _0068511 SHIFT LEVER A

A343E AUTOMATIC TRANSMISSION / TRANSAXLE  SHIFT LEVER  INSTALLATION  


PROCEDURE

Hide 1.INSTALL FLOOR SHIFT ASSEMBLY

a.
C282189
2.594,1.979 2.75,2.177 0.156,0.198 10 true 1 0.854,0.573 1.01,0.771 0.156,0.198 10 true 2 0.813,1.979 0.969,2.177 0.156,0.198 10 true 3 2.583,0.594 2.74,0.792 0.156,0.198 10 true 4

Install the floor shift with the 4 bolts.

NOTICE:

Tighten the bolts in the order shown in the illustration.


Torque:
14 N*m (143 kgf*cm, 10 ft.*lbf)


b.

Move the shift lever to L.


c.

Connect the transmission control cable.


d.

Connect the clamp and 2 connectors.