Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE PEDAL
RM1880E _54 Brake _013227 BRAKE SYSTEM (OTHER) _0068565 BRAKE PEDAL A

BRAKE SYSTEM (OTHER)  BRAKE PEDAL  REASSEMBLY  


PROCEDURE

Hide 1.INSTALL BRAKE PEDAL PAD

Hide 2.INSTALL STOP LIGHT SWITCH ASSEMBLY

Hide 3.INSTALL BRAKE PEDAL SUB-ASSEMBLY

a.
C281571
2.667,1.125 2.667,1.833 2.667,1.833 2.917,1.833 false 1.76,1.188 2.01,0.604 2.01,0.604 2.26,0.604 false 1.146,1.208 0.917,0.594 0.917,0.594 0.667,0.594 false 0.75,1.688 0.75,2.25 0.75,2.25 0.5,2.25 false 0.448,0.51 0.833,0.792 0.385,0.281 10 false *1 2.323,0.51 2.688,0.76 0.365,0.25 10 false *2 0.333,2.167 0.698,2.417 0.365,0.25 10 false *3 2.969,1.75 3.365,2.042 0.396,0.292 10 false *4 0.74,2.865 1.167,3.094 0.427,0.229 10 false *5
*1 Brake Pedal
*2 Brake Pedal Shaft Collar
*3 Bush
*4 Brake Pedal Shaft
*5 Lithium soap base glycol grease


Apply a light coat of lithium soap base glycol grease to 2 new bushes, the brake pedal shaft collar and shaft.


b.

Install the brake pedal shaft collar and 2 bushes to the pedal.


c.

Install the pedal to the support with the shaft to nut.

Torque:
26 N*m (265 kgf*cm, 19 ft.*lbf)