| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Note |
|---|---|---|---|---|
| 01-21 | ROM Error | A malfunction exists in ROM. | Radio receiver assembly | Communication Diagnosis |
| 01-22 | RAM Error | A malfunction exists in RAM. | Radio receiver assembly | Communication Diagnosis |
| 01-23 | Bus Malfunction | A malfunction exists in the bus. | Radio receiver assembly | Communication Diagnosis |
| 01-2A | Internal Power Supply | An internal power source malfunction exists. | Radio receiver assembly | Communication Diagnosis |
| 01-2B | Internal Hardware | An internal hardware malfunction exists (CPU fan, video decoder malfunction, GVIF IC, MOST [INIC]). | Radio receiver assembly | Communication Diagnosis |
| 01-2E | EEPROM Error | A checksum malfunction exists. | Radio receiver assembly | Communication Diagnosis |
After the inspection is completed, clear the DTCs.
Replace the radio receiver assembly.
Click hereAudio / Visual / Telematics>AUDIO / VIDEO>RADIO RECEIVER>REMOVAL
| Proceed to |
|---|
| NEXT |
NEXT