Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM(for Radio Receiver Type)
RM1880E _56 Audio / Visual / Telematics _013234 AUDIO / VIDEO _0068593 AUDIO AND VISUAL SYSTEM(for Radio Receiver Type) C

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio Receiver Type)  62-46  Scratched / Reversed Disc  


DESCRIPTION

DTC No. Detection Item DTC Detection Condition Trouble Area Note
62-46 Scratched / Reversed Disc Scratches or dirt is found on the disc surface or the disc is inserted upside down.
·

Disc

·

Radio receiver assembly


CD Player

CAUTION / NOTICE / HINT

HINT:

After the inspection is completed, clear the DTCs.


PROCEDURE

1.CHECK THAT DISC IS INSERTED PROPERLY
a.

Check whether or not the disc is inserted upside down.

OK:

The disc is properly inserted.



Result:
Proceed to
OK
NG



OK

2.CHECK DISC

NG

INSERT DISC PROPERLY

2.CHECK DISC
a.
I100152

Check that the disc is not deformed or cracked.

OK:

No deformation or cracks in the disc.



Result:
Proceed to
OK
NG



OK

3.DISC CLEANING

NG

CHANGE DISC

3.DISC CLEANING
a.
I100151

If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

NOTICE:

Do not use a conventional record cleaner or antistatic preservative.



Result:
Proceed to
NEXT



NEXT

4.CHECK FOR DTC
4.CHECK FOR DTC

b.

Check for DTCs and check if the same trouble occurs again.

OK:

Malfunction disappears.



Result:
Proceed to
OK
NG



OK

NG

5.REINSERT DISC PROPERLY
5.REINSERT DISC PROPERLY
a.

Replace the disc with a normal one.



c.

Check for DTCs and check if the same trouble occurs again.

OK:

Malfunction disappears.



Result:
Proceed to
OK
NG



OK

END (DISC IS FAULTY)

NG

REPLACE RADIO RECEIVER ASSEMBLY