Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM(for Radio and Display Type)
RM1880E _56 Audio / Visual / Telematics _013234 AUDIO / VIDEO _0068594 AUDIO AND VISUAL SYSTEM(for Radio and Display Type) D

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio and Display Type)  OPERATION CHECK  


CHECK PANEL & STEERING SWITCH


HINT:
·

The radio and display receiver assembly panel switches are checked in the following procedure.

·

Illustrations may differ from the actual vehicle screen depending on the device settings and options. Therefore, some detailed areas may not be exactly the same as on the actual vehicle screen.

·

Some of the following functions may also differ from the actual vehicle depending on the device settings and options.




b.
E221996

Select "Function Check/Setting" from the "Service Menu" screen.


c.
E221999

Select "Panel & Steering Switch" from the "Function Check/Setting I" screen.


d.

Panel & Steering Switch Check Mode

i.
E219355
2.427,1.25 2.427,1.365 2.427,1.365 2.542,1.365 false 2.469,1.573 2.667,1.573 false 1.51,1.25 1.51,1.365 1.51,1.365 1.625,1.365 false 2.594,1.271 2.781,1.448 0.188,0.177 10 false *2 1.677,1.26 1.906,1.458 0.229,0.198 10 false *1 2.708,1.469 2.927,1.667 0.219,0.198 10 false *3

Operate each switch and check that the number of switches pushed and the switch conditions are correctly displayed.

Screen Description
Display Content
*1: Switch condition "Pushed" is displayed when any switch is pushed
*2: Number of pushed switch
·

Number of switches pushed at once

·

If more than 3 switches are pushed at once, "More than 3" is displayed


*3: Rotary switch direction Direction of rotary switch is displayed




CHECK TOUCH SWITCH


HINT:
·

The touch switches on the screen are checked in the following procedure.

·

Illustrations may differ from the actual vehicle screen depending on the device settings and options. Therefore, some detailed areas may not be exactly the same as on the actual vehicle screen.




b.
E221996

Select "Function Check/Setting" from the "Service Menu" screen.


c.
E222006

Select "Touch Switch" from the "Function Check/Setting I" screen.


d.
E176521

Touch Switch Check

i.

Touch the display anywhere in the open area to perform the check when the "Touch Switch Check" screen is displayed.

HINT:
·

A "+" mark is displayed where the display is touched.

·

The "+" mark remains on the display even after the finger is removed.






CHECK MIC & VOICE RECOGNITION


HINT:
·

The microphone and microphone input level are checked in the following procedure.

·

Illustrations may differ from the actual vehicle screen depending on the device settings and options. Therefore, some detailed areas may not be exactly the same as on the actual vehicle screen.




b.
E221996

Select "Function Check/Setting" from the "Service Menu" screen.


c.
E222012

Select "Mic & Voice Recognition" from the "Function Check/Setting I" screen.


d.

Microphone & Voice Recognition Check

i.
E222013

When speaking into the microphone, check that the microphone input level meter changes according to the input level.




CHECK COLOR BAR


HINT:
·

The display color on the screen is checked in the following procedure.

·

Illustrations may differ from the actual vehicle screen depending on the device settings and options. Therefore, some detailed areas may not be exactly the same as on the actual vehicle screen.




b.
E221996

Select "Function Check/Setting" from the "Service Menu" screen.


c.
E222014

Select "Color Bar" from the "Function Check/Setting I" screen.


d.

Color Bar Check Mode

i.
E222015

Select a color bar from the "Color Bar Check Mode" screen.


ii.

Check the display color.

HINT:
·

The entire screen turns to the color or stripe selected.

·

Touching the display returns to the "Color Bar Check" screen.






CHECK VEHICLE SIGNAL


HINT:
·

Vehicle signals received by the radio and display receiver assembly are checked in the following procedure.

·

Illustrations may differ from the actual vehicle screen depending on the device settings and options. Therefore, some detailed areas may not be exactly the same as on the actual vehicle screen.




b.
E221996

Select "Function Check/Setting" from the "Service Menu" screen.


c.
E222017

Select "Vehicle Signal" from the "Function Check/Setting I" screen.


d.

Vehicle Signal Check Mode

i.
E222021

When the "Vehicle Signal Check Mode" screen is displayed, check all the vehicle signal conditions.

HINT:
·

Only conditions having inputs are displayed.

·

This screen displays vehicle signals input to the radio and display receiver assembly.

·

For details of this function, refer to Diagnosis Display Detailed Description in System Description (See page Audio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM(for Radio and Display Type)>SYSTEM DESCRIPTION).






CHECK HANDSFREE VOICE QUALITY SETTING


HINT:
·

The handsfree volume of a "Bluetooth" compatible phone can be adjusted using the following procedure.

·

Illustrations may differ from the actual vehicle screen depending on the device settings and options. Therefore, some detailed areas may not be exactly the same as on the actual vehicle screen.




b.
E221996

Select "Function Check/Setting" from the "Service Menu" screen.


c.
E222022

Select "HF Voice Quality Setting" from the "Function Check/Setting I" screen.


d.

Receive/Send Voice Level adjustment

NOTICE:

Sound quality may deteriorate when the receive voice level is changed more than necessary. For this reason, check that the received voice quality is still acceptable after changing this setting.


i.

If the voice level is low, press "+" button, and if the voice level is loud, press "-" button.

HINT:
·

Each voice level setting is reflected when going back to the normal mode.

·

The changing voice level ranges from -5 to +5.

·

The initial level is "0".





e.

Voice Quality Type Adjustment

i.
C240227
2.813,1.052 3.042,1.521 3.042,1.521 3.156,1.521 true 2.521,1.563 2.521,1.948 2.521,1.948 2.385,1.948 true 1.625,1.563 1.625,1.948 1.625,1.948 1.49,1.948 true 3.188,1.438 3.427,1.667 0.24,0.229 10 false *a 2.198,1.865 2.49,2.083 0.292,0.219 10 false *b 1.292,1.854 1.646,2.073 0.354,0.219 10 false *c
*a Numeric keypad
*b Setting button
*c Reset button


When changing the settings, use the number pad on the screen and input the voice quality type according to the chart below.

Settings
Parameter Target Phenomenon Voice Quality Type (FUJITSU TEN) Voice Quality Type (Pioneer) Voice Quality Type (Panasonic) Effect of Changing Voice Quality Parameter Adverse Effect of Changing Voice Quality Parameter
Echo The other party hears their own voice echoed back to a large degree.
·

1000

·

2000


·

0001

·

0002

·

0003

·

0004

·

0005


0001 The amount that the other party hears their own voice echoed back is reduced. When both parties speak at the same time, the voice heard by the other party suddenly becomes quiet, cuts out, etc.
Half Duplex When both parties speak at the same time, the voice heard by the other party suddenly becomes quiet, cuts out, etc.
·

0100

·

0200


·

0010

·

0020

·

0030

·

0040

·

0050


0002 The phenomenon in which the voice heard by the other party suddenly becomes quiet, cuts out, etc. when both parties speak at the same time is reduced. The amount that the other party hears their own voice echoed back increases.
Noise A large amount of noise, such as vehicle or road noise, is mixed together with the voice heard by the other party.
·

0010

·

0020


·

0100

·

0200

·

0300

·

0400

·

0500


0004 The amount of noise, such as vehicle or road noise, that is mixed together with the voice heard by the other party is reduced. The quality of the voice heard by the other party worsens.
Quality The quality of the voice heard by the other party is bad.
·

0001

·

0002


·

1000

·

2000

·

3000

·

4000

·

5000


0003 The quality of the voice heard by the other party improves. The amount of noise, such vehicle or road noise, that is mixed together with the voice heard by the other party increases.

HINT:
·

Refer to the "Unit Version Information" screen for information regarding the manufacturer of the radio and display receiver assembly (See page Audio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM(for Radio and Display Type)>SYSTEM DESCRIPTION).

·

Voice Quality Type Adjustment can only be used to adjust the quality of the voice heard by the other party. It cannot be used to adjust the quality of the voice heard by the user.

·

The default value is 0000.

·

Any changes to settings are applied when the display returns to the normal screen.

·

For cases where there is more than one value, selecting a larger value increases the effect, but the adverse effects also increase.

·

If a value not listed in the chart is entered, the change may not be applied, or the desired effect may not be achieved.

·

If voice quality worsens as a result of changing the settings, press the "INIT" switch and return the value to 0000.