Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › TELEVISION CAMERA
RM1880E _56 Audio / Visual / Telematics _013235 PARK ASSIST / MONITORING _0068599 TELEVISION CAMERA A

PARK ASSIST / MONITORING  TELEVISION CAMERA  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:

A bolt without a torque specification is shown in the standard bolt chart (See page General>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS).


PROCEDURE

Hide 1.INSTALL REAR TELEVISION CAMERA ASSEMBLY

a.

Attach the 2 claws to install the rear television camera assembly.


b.

Connect the connector.


Hide 2.INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY

Hide 3.INSTALL BACK DOOR TRIM BOARD ASSEMBLY