Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › STEERING PAD
RM1880E _58 Vehicle Interior _013242 SUPPLEMENTAL RESTRAINT SYSTEMS _0068636 STEERING PAD G

SUPPLEMENTAL RESTRAINT SYSTEMS  STEERING PAD  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.CHECK STEERING PAD (VEHICLE NOT INVOLVED IN COLLISION)


b.

With the steering pad installed on the vehicle, perform a visual check. If there are any defects as mentioned below, replace the steering pad with a new one:

Cuts, minute cracks or marked discoloration on the steering pad top surface or in the grooved portion.


Hide 2.CHECK STEERING PAD (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)


b.

With the steering pad removed from the vehicle, perform a visual check. If there are any defects as mentioned below, replace the steering pad or steering wheel with a new one:

·

Cuts, minute cracks, or marked discoloration on the steering pad.

·

Cracks or other damage to the connectors.

·

Deformation or cracks in the steering pad contact plate.


CAUTION:

For removal and installation of the steering pad assembly, be sure to follow the correct procedure.