1.CHECK INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION AND AIRBAG NOT DEPLOYED)
Perform a diagnostic system check (See page Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>DIAGNOSIS SYSTEM).
With the instrument panel passenger airbag assembly installed on the vehicle, perform a visual check. If there are any defects as mentioned below, replace the instrument panel passenger airbag assembly with a new one:
Cuts, minute cracks or marked discoloration on the instrument panel passenger airbag assembly.
2.CHECK INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG NOT DEPLOYED)
Perform a diagnostic system check (See page Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>DIAGNOSIS SYSTEM).
With the instrument panel passenger airbag assembly removed from the vehicle, perform a visual check. If there are any defects as mentioned below, replace the instrument panel passenger airbag assembly with a new one:
Check for cuts, cracks or discoloration on the instrument panel passenger airbag assembly.
Check for cracks or other damage on the connector.
Check for deformation or cracks on the instrument panel and instrument panel reinforcement.
For removal and installation of the front passenger airbag, be sure to follow the correct procedures.