Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
1.REMOVE FRONT SEAT ASSEMBLY
2.REMOVE FRONT SEAT INNER BELT ASSEMBLY LH
Detach the clamp.
Detach the wire harness from the clamp.
Roll up the front seat cushion cover LH.
Remove the nut and front seat inner belt assembly LH.
3.REMOVE FRONT SEAT INNER BELT ASSEMBLY RH
| *a | Front |
Disconnect the connector.
Detach the 2 clamps.
Detach the wire harness from the clamp.
Roll up the front seat cushion cover RH.
Remove the nut and front seat inner belt assembly RH.
4.REMOVE FRONT SEAT CUSHION COVER LH
Remove the front seat cushion cover LH.
Use the same procedure to remove the front seat cushion cover on the other side.