1.INSTALL FRONT SHOULDER BELT ANCHOR ADJUSTER ASSEMBLY
Insert the tip of the adjuster into the body as shown in the illustration.
Install the front shoulder belt anchor adjuster assembly with the bolt.
2.INSTALL SHOULDER BELT ANCHORAGE PLATE COVER
| *a | Slide |
| *b | Mark |
Install the shoulder belt anchorage plate cover as shown in the illustration.
Make sure the shoulder belt anchorage plate cover is firmly set into the guides.
3.INSTALL CENTER PILLAR GARNISH LH
4.INSTALL FRONT SEAT OUTER BELT ASSEMBLY LH
Do not disassemble the retractor.
w/o Pretensioner:
Align the outer belt positioning holes with the claws and install the retractor of the front seat outer belt assembly LH with the bolt.
w/ Pretensioner:
Align the outer belt positioning holes with the claws and install the retractor of the front seat outer belt assembly LH with the 2 bolts.
Connect the pretensioner connector as shown in the illustration.
Close the cover.
Install the front seat outer belt shoulder anchor with the bolt.
Install the seat belt anchor cover cap with the 4 claws.
5.INSTALL LOWER CENTER PILLAR GARNISH LH
Attach the 2 clips and 2 claws to install the lower center pillar garnish LH.
Install the front seat outer belt floor anchor with the bolt.
6.INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH
7.INSTALL FRONT DOOR OPENING TRIM LH
8.INSTALL REAR DOOR SCUFF PLATE LH
9.INSTALL FRONT DOOR SCUFF PLATE LH