Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING PANEL(for Automatic Air Conditioning System)
RM1880E _58 Vehicle Interior _013245 HEATING / AIR CONDITIONING _0068678 AIR CONDITIONING PANEL(for Automatic Air Conditioning System) A

HEATING / AIR CONDITIONING  AIR CONDITIONING PANEL(for Automatic Air Conditioning System)  REMOVAL  


PROCEDURE

Hide 1.REMOVE CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL

Hide 2.REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

Hide 3.REMOVE INTEGRATION PANEL SUB-ASSEMBLY

a.
E227436

Remove the 4 screws.


b.
E227437

Remove the 4 screws.


c.

Detach the 3 claws and disconnect the lower heater control base.


d.
E171264
0.701,0.669 0.906,0.849 0.205,0.181 10 *1 0.873,0.75 1.251,0.75 false
*1 No. 1 Cooler Wire


Disconnect the No. 1 cooler wire from the integration panel sub-assembly (air conditioning panel) as shown in the illustration.

NOTICE:

Before performing the procedure above, the hazard switch must be turned off. If the switch is on while the base is removed, damage to the switch will occur.