1.INSTALL AIR CONDITIONING AMPLIFIER ASSEMBLY
Install the air conditioning amplifier assembly.
| *1 | Air Conditioning Amplifier Assembly |
| *2 | No. 1 Cooler Wire |
Connect the No. 1 cooler wire to the air conditioning amplifier assembly as shown in the illustration.
2.INSTALL HEATER CONTROL BASE
Attach the 4 claws to install the heater control base.
3.CONNECT NO. 1 COOLER WIRE
Connect the connector as shown in the illustration.
4.INSTALL LOWER HEATER CONTROL BASE
Attach the 3 claws to the lower heater control base.
Install the 4 screws.
Install the 4 screws.
5.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
6.INSTALL CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL