1.REMOVE CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL
2.REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
3.REMOVE LOWER HEATER CONTROL BASE
Remove the 4 screws.
Remove the 4 screws.
Detach the 3 claws and disconnect the lower heater control base.
4.DISCONNECT NO. 1 COOLER WIRE
Disconnect the connector as shown in the illustration.
5.REMOVE HEATER CONTROL BASE
Detach the 4 claws and remove the heater control base.
6.REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY
| *1 | Air Conditioning Amplifier Assembly |
| *2 | No. 1 Cooler Wire |
Disconnect the No. 1 cooler wire from the air conditioning amplifier assembly as shown in the illustration.
Remove the air conditioning amplifier assembly.