Home › Vehicle Exterior › WINDOW / GLASS › POWER WINDOW MASTER SWITCH
RM1880E _59 Vehicle Exterior _013248 WINDOW / GLASS _0068702 POWER WINDOW MASTER SWITCH A

WINDOW / GLASS  POWER WINDOW MASTER SWITCH  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 1.INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY

a.

Install the power window regulator master switch assembly to the front upper armrest base panel RH with the 3 screws.


Hide 2.INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT UPPER ARMREST BASE PANEL LH

Hide 3.INITIALIZE POWER WINDOW CONTROL SYSTEM (w/ Jam Protection Function)