Home › Vehicle Exterior › WIPER / WASHER › WASHER MOTOR(for Front Side)
RM1880E _59 Vehicle Exterior _013251 WIPER / WASHER _0068731 WASHER MOTOR(for Front Side) A

WIPER / WASHER  WASHER MOTOR(for Front Side)  INSTALLATION  


PROCEDURE

Hide 1.INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY

a.
B113196

Install the windshield washer motor and pump to the packing of the washer jar.


Hide 2.INSTALL WINDSHIELD WASHER JAR ASSEMBLY

a.
E225300

Install the windshield washer jar and pump with the 3 bolts. Then attach the 3 clamps.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)


b.

Connect the connectors and 2 washer hoses.


c.

Install the grommet.


Hide 3.FILL UP WASHER JAR AND PUMP ASSEMBLY WITH WASHER FLUID

a.

Fill the washer jar with washer fluid.


Hide 6.INSTALL WASHER INLET SUB-ASSEMBLY

a.
E226577

Install the washer inlet of the washer jar and pump to the windshield washer jar and pump.


b.
E226585

Install the washer inlet of the washer jar and pump with the clip.