Home › Vehicle Exterior › WIPER / WASHER › WASHER MOTOR(for Front Side)
RM1880E _59 Vehicle Exterior _013251 WIPER / WASHER _0068731 WASHER MOTOR(for Front Side) A

WIPER / WASHER  WASHER MOTOR(for Front Side)  REMOVAL  


PROCEDURE

Hide 1.REMOVE WASHER INLET SUB-ASSEMBLY

a.
E226574

Remove the clip.


b.

Pull the washer inlet of the washer jar and pump upward. Then remove it from the windshield washer jar and pump.


Hide 4.DRAIN WASHER FLUID

a.
E226575

Disconnect the washer hose from the windshield washer motor and pump, and drain the washer fluid.

HINT:

Use a container to collect the washer fluid.



Hide 5.REMOVE WINDSHIELD WASHER JAR ASSEMBLY

a.
E226576

Remove the grommet.


b.
E225297

Disconnect the 2 connectors and 2 washer hoses.


c.

Detach the 3 clamps and remove the 3 bolts. Then remove the washer jar and pump.


Hide 6.REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY

a.
B117865

Pull out the washer motor and pump from the packing of the washer jar.